Subtitle: The Conundrum I completed a very public build of a wall-hung tool cabinet a few weeks ago and it is still essentially empty. There are more variations to filling such cabinets as Carters’ got pills, as my mother used to say, but I haven’t run across any treatise on wall-hung cabinets as omnipotent as Lysdexic’s one-time post. I’ve been running through some arrangements as time permits that attempt to match form with function, but referred to The Criteria (as I’ve been calling his...
When we left subject cabinet, the last part of the build was done, as the upper door pieces were cut and fit and glued up. Stiles ran long on the doors, as Lysdexic correctly pointed out, to prevent spitting of the entire stile while the mortises were cut. So we know the doors needed a trim length wise. What I didn’t realize is how close I had made it re: the rails. You can see in the pics below I had to preserve all of the rail material… Whew… There was ve...
Since rivergirl has built me a stool that is exactly the way that I wanted it to look I decided that I would build her a tool box as a way of reciprocating. I love the footstool and I think that she did a fine job on it and the wood and finish is just beautiful. It is as though rivergirl had read my mind about the way that I wanted my stool to look. rivergirl has told me that her stool has some flaws in it but I am sure that her tool box will also have some flaws in it so that is as it should...
The wall hung has suffered from extreme neglect, but some progress was made over the Holiday Break. So, an installment! Here’s the cabinet in raw form: No doors, no drawers, no tambour. Here’s the door to be installed to slide and close the lower left corner opening. It’s been patiently waiting for me to give it any attention, and finally the time came. I saved the radius turns from the original Hoosier top, and those were used to trace top radius corners as we...
There’s been more progress in the last several days than in the several months previous, so here goes another installment… When we spoke last, the Venerable Wall Hung Hung Tool Cabinet was where it has been for nearly ten months: on it’s back, on top of my assembly bench. The tambour has been fitted, and the sliding plane till door is in working order, albeit bounded by f-clamps and a certain, left-most stile. Oh, the stile. Here it is, and without any detail (sorr...
Pictures tonight, but precious little dialogue. Lunchbox planer was out with a bad switch, but it came back this weekend. So the boards went through multiple passes then were each given the #4 smoother treatment. I did move to the #4 1/2 after awhile, and the mass was very welcome. I ripped a thicker board then did the re-saw of those boards on the old Craftsman bandsaw. When the night was over, the cabinet was covered with the fruits of the evening’s labor. Let ...
Whatever was selected for the backing material of this cabinet needed to add strength, look good and be 1/2” thick. Plywood meets two out of three of those requirements, but I just can’t fall in love with the idea of plywood in my tool till. Biggest hurdle with any other material is the work I might have to do to get it to that 1/2” thickness. I checked the remaining inventory of poplar (says Don W, and he should know) boards salvaged from somewhere, some time ago. This s...
Jamies tool cabineta happy monkey in Jamies work shop. As some of you read I spend ten wonderful days in Scotland.Ten days that filled my heart, opened my mind and gave me a deep inner peace.Yes I was with Buddhists, but no, I was not sitting on top of a mountain in Lotus.I was with the most wonderful people, especially Jamie and Shirley who had opened their doors for me.I was meditating and even listening to Zen sounds and smell of heaven.The meditation was done in the morning after break...
For all of you cabinet builders on this site, my hat is off to you! I never fully realized the work that is involved in making a cabinet and how even the smallest mistakes can compound so very quickly… Right before Christmas I posted this blog asking for input on plans for a tool cabinet. Well, I took all the advice I received and have been furiously building over the holidays. Here is where I stand—I have completed the actual “cabinet” portion of the project. ...
At one point in another forum post here on LJs, I offered a tool cabinet would be worked using the raw materials salvaged from this old Hoosier cabinet topper. Including the beat up piece of tambour door. Some fine grit ROS work on the tambouR got it to look presentable; here it is sitting on top of the now-disassembled topper. Not sure where this is headed, evidenced by the foot-dragging on the project so far. But, I did build a headboard in the meantime, so it’...
- My Journey As A Scroll Saw Pattern Designer - 1182 parts
- Extremely Average - 325 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1204 entries
- frank - 417 entries
- degoose - 387 entries
- dbhost - 331 entries
- Ecocandle - 326 entries
- MsDebbieP - 299 entries
- Martin Sojka - 297 entries
- Karson - 292 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- mafe - 201 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- BritBoxmaker - 159 entries
- shipwright - 159 entries
- scottb - 144 entries