In this video I share some tips and suggestions as I show how I handle and transport some of my projects without damaging them. Everybody’s needs are different, but I hope that sharing these tips will help inspire solutions for your needs when handling & transporting projects. Your friend in the shop, Todd A. Clippinger Share the Love~Share the Knowledge
I ran into a situation where my clamping needs exceeded my clamp capacities. I did a quick video to share my solution because it might help someone else in their shop. This video is “quick & dirty” because I wanted to try recording it on my iPhone. I don’t see myself doing that again, but the information is still good and clear. I hope you find it helpful. Your friend in the shop, Todd A. Clippinger Share the Love ~ Share the Knowledge
I just finished up the video for applying edge banding to melamine. This video follows Part 1 on how to get clean cuts in melamine, which can be quite a challenge without the right blade and techniques. Once the melamine is cut, often it will need to have edge banding applied. So I cover this topic in Part 2. I could have made a 2 minute video that shows me applying a piece with an iron and trimming the excess, but that can leave a person with a lot of questions. In these videos, you no...
Hey guys, I really should be out in the shop right now, I am waaay behind on my project. But I need to let you guys know that everyone is invited to the opening night of a Fine Woodworking Exhibition at the Museum of the Rockies in Bozeman, MT. I will be there as I am participating in the exhibition with a new version of my prairie chandeliers. The Opening Schedule: Here is the opening show schedule: Friday, Oct 26th: 5pm Artisans’ Reception Saturday, Oct 27th: 11a.m.-2p....
Hey guys! As usual, the summer season is the busiest for my remodeling work and it takes me away from my passion of sharing with the woodworking community. But I will take what I can get so the good news is that I am still at it. The latest issue of WOOD Magazine has just hit the bookstores and mailboxes and I was lucky enough to get a full page of coverage! The article gives tips from 4 small pro shops and mine was one of the shops covered. While there is a lot more wisdom and exper...
De’ja’ vu Last year I built a Shaker Bench for one of our favorite local charities. I was not going to make the deadline and Brian Havens flew out at a moment’s notice to help me build & deliver the bench just in time to be fashionably late rather than just late. (See blog entry here at LJ.) This year I started my project a couple of weeks early but things did not go as smoothly as I would have liked on the project nor my schedule. As a professional contractor my s...
Melamine is notorious for chipping out when cutting. In this video I share my tools and techniques for creating clean cuts on both sides of melamine. The blade I use in the video is a Freud LU97R010. It makes the cut on the back side as clean as on the top side. The images of the cuts in the video are of the backside of the material where chip-out tends to occur. (I did not make that clear in the video.) In Part II I will show you how to apply edge banding. This is not just instr...
As woodworkers we also need to cut metal once in a while. Also, having the ability to cut metal will allow us to create custom handles as I have on past projects. The question is how do we get a clean cut? Hacksaw? Reciprocating saw? Nope – portaband is the answer. The portaband is a powerful, smooth cutting portable bandsaw and a tool that I recommend for any custom woodworkding shop. Hope you enjoy! Your friend in the shop- Todd A. Clippinger Share the Love~Share ...
I Just Had To Share The Excitement! I was getting ready to pull a project out of the vacuum press and I decided this would be the perfect time to shoot a test video for my new audio equipment. Besides that, popping the vacuum press open is one of my favorite moments in the shop – and now you get to share in it! In this video, I do not get specifically into the step-by-step of bent lamination and using the vacuum press, but it is highly informative. You will get to see the actual m...
The Journey It’s been a lot of work to get to this point. Since taking a beating from the recession, I took all of the work I could get to recover over the last couple of years. Between working projects out of my shop, working with another contractor, and Rita opening a cafe in downtown Billings, there was not any free time to get out any blogs let alone video. I have been chomping at the bit to get back to sharing with the woodworking community. Sharing the craft with others has ...
- My Journey As A Scroll Saw Pattern Designer - 1262 parts
- Extremely Average - 324 parts
- Workshop Development - 94 parts
- A journey into the workshop. - 88 parts
- Daily Update - 87 parts
- Just for Fun... - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- As The Lathe Turns - 73 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1284 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 368 entries
- Ecocandle - 325 entries
- MsDebbieP - 311 entries
- Karson - 301 entries
- Martin Sojka - 297 entries
- William - 255 entries
- Betsy - 221 entries
- mafe - 216 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- shipwright - 168 entries
- PurpLev - 163 entries
- BritBoxmaker - 159 entries
- stefang - 148 entries