Last time in this series I put together some drawer boxes. Next they’d need slides, and for that I went with parallel sliding dovetails, which I first saw GaryK create in walnut here. I’ve wanted since I saw those early last year to try my hand at making some. I spent some time one night last week building a SketchUp model based on GaryK’s photos of his results and designed around a bit I had from the Incra set, then wrote up a plan of attack for how to go about building the...
Here’s my most boring time-lapse yet – sanding up the cabinet doors to flush the rails and stiles, and prepare it for finishing. Speaking of… something I’d heard whispered around here a few times came to mind the other day while trying to get extremely gummy stickers off the maple I used in this project: mineral spirits. It says right on the can “for cleaning surfaces in preparation for painting.” I wiped some on, and just like goop-off, the sticker goo wip...
When we last left off, I was about to glue up the first cabinet door. Here it is clamped and drying: Here’s a detail (the wet marks at the left are just from wiping out glue – they dried up and disappeared): And because time-lapse videos are so fun, here’s the glue-up of the second door: And now the finished doors. Well… finished gluing together. Now there’s still sanding and coats of whatever I decide to use. I’ve been thinking of de...
A bit over a week ago I found some logs outside a neighbor’s place down the street while on my way home from work on a Friday night. They were Ficus microcarpa (AKA Chinese banyan, AKA Indian Laurel, AKA curtain fig, AKA etc…). Almost a week later – a few days ago – I found another load of the same logs in the same spot on my way home for lunch. This morning while heading into work, I passed the same spot, and the biggest haul yet was sitting there. I was running a few...
With the carcass hung on the wall, I turned to the cheapest 1/2” BC plywood I could find at Home Depot for making the shelves. I’m trying this new thing where I don’t blow through wads of cash on utility projects and hair-brained schemes. They were pretty warped and ugly, but cutting them down to 23” (22-7/8” actual) x 16” got rid of most of the problems. These are utility shelves, so a little warp is okay by me. Here’s me cutting the 12 shelves fr...
I recently remembered that my Canon PowerShot SD500 IS Digital Elph Longest Name For A Camera Ever has a time-lapse mode. You can set it to capture a frame every 1 or 2 seconds. I’ve been pointing it at my work areas lately with the latter (less frequent) capture setting, and just letting it run for an hour or two. It’s fun to watch later, though it pains me to know that no matter how hard I try, I’ll never accomplish anything at this speed. This is me doing some of the w...
- My Journey As A Scroll Saw Pattern Designer - 1598 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1623 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 220 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries