(This is the first post here, but a continuation of a series started at my personal blog at tenonandspline.com/blog) I’m not what you would call a “neat freak.” However, I do try to keep things generally organized and find it near impossible to work in a cluttered shop. Not only do I find it technically difficult to work in an unorganized mess – I find it hopelessly depressing as well. Consequently, when the shop is cluttered I will typically avoid doing any woodwor...
Well I’ve had to package up a few pieces to get shipped so I decided to make a time lapse video of the process of building a shipping crate for one of my Black Walnut coffee tables. Enjoy!
Building a drawer pedestal in 35 seconds. Just having some fun. I just wish I could really knock them out that fast. Time Lapse For more building pictures see my Current Projects link at wwbeds.com or poggyskids.com. See what we are doing live:
Here is another video in our time lapse woodworking series, this time around I’m re-sawing a 13’’ 8/4 solid Canadian Black Walnut board about 33’’ long into 4 pieces that need to end up 3/8’’ thick. These will be the panels in a frame and panel center divider for a shelving unit we’re building for a display for a local store. First I throw on a new blade, I’m just using a 3/8’’ blade from our local band saw blade place cal...
We decide to set up our Nikon D-80 on a tripod to make a time lapse video. I have done a bunch of reading, how to’s and what not regarding time lapse with a Nikon. Just hook it up to a computer, in our case a Mac Book Pro use Nikons Camera control software. The software has time lapse feature built right with every setting you would need to adjust. We setup the camera to take a picture every 5 seconds, then into Quicktime Pro at 15 frames per second. Anyways check it out, I think ...
This is a test of a jimmy rigged lazy susan mounted to a slow speed gear motor.I always have ideas running through my head about how to share my custom wooden rocking chairs and other pieces, this is one of the less refined ideas, but i’m happy my idea is going to work out well once I get the bugs worked out. Hopefully soon I will build a dolly for the camera so the camera can move while the chair rotates. This example is using a Walnut with Ebony plugs custom wood rocking chair, ...
I’ve been working on a set of dining chairs so I took some time to show how I sculpt some of this chair. The underside of the seat and round over on the legs needed to be sculpted to match the original chair I’ve been commissioned to build. I use Kutzall brand shaping wheels and grinding burrs for the die grinder. I love there carbide shaping tools, they never wear out and are extremely safe because there are hundreds of little cutting burrs that seem to be very easy to control...
In this time lapse video I am gluing up 4 flexible back braces for a custom wooden rocking chair. A back brace is built using 4 layers each layer being about 2.2mm thick, the top or front layer is Birdseye Maple the rest are Walnut. This chair will be Black Canadian Walnut thus the the Birdseye Maple will give a attractive and interesting contrast to the rest of the chair. We make sure to cut the fronts and backs from a single piece and keep everything in order so in the end we have a beautif...
Hi everyone, I’ve finally put together a small bit of footage from my daily activities in my wood working shop. I’ve been working on a Walnut and Bubinga home bar which is all done now, but still finishing up the live edge chair rail and wall paneling. At the same time I have 9 bar stools on the go needing to get shipped and deilvered soon. So there’s been some long hours in the shop this past month. In this video I’m making a rabbit on the chair rail to sit on top ...
This time around in our time lapse woodworking series I’m sanding a pair of Canadian Black Walnut panels that will be assembled into a frame and panel. The panels have been re-sawed out of a 2’’ thick board to allow for a beautiful book match, I showed the process in the previous video Re-sawing 2’’ thick Canadian Black Walnut I first start out with 220 sandpaper on our festool RO150, then to 320, 400, 500 and finally a sheep wool pad to burnish and pull out...
- My Journey As A Creative Designer - Woodworking and Beyond - 1766 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Toy costruction - 93 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1791 entries
- dbhost - 430 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 252 entries
- Betsy - 228 entries
- robscastle - 225 entries
- stefang - 221 entries
- Dave Rutan - 219 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 198 entries
- Smitty_Cabinetshop - 194 entries