I picked up a great looking walnut log today. The widest place was over 29” at the crotch and it just fit my TimberKing 1220 sawmill. I had to cut the limbs slightly shorter so I could slice it into flitches. I don’t have a bobcat or a backhoe to load logs… so, I had to wrestle them on the trailer. One item I did get to help load logs was a 3000 lb electric winch. Only one problem with it today. The battery was discharged! I had to use my back up plan. A manual w...
I woke up this morning and when I let my shop buddy out for her morning search for ‘that perfect spot’ to take care of her doggie business and I found a huge limb broken out of the big maple tree near my front walk. The pictures are a little dark because the Sun was just rising when I took the pictures. I’ve been cleaning it up and while I’m resting I’ll write this blog entry before I finish cleaning it up. This maple tree was planted when my 2 story ...
Here’s a photo and a description of how I sawed a huge red oak log to get the most quartersawn lumber from it with the least waste. My saw has a 34” capacity at the widest point, but the bolts holding the adjustable guide for the blade reduce that some and I had to use my chainsaw a couple of times to get enough clearance for the widest part of the log. The throat opens to make a 29.5” cut at the widest point. (If you take off part of the lube system) The red lines show t...
I posted a project the other day about my wood gloat! My new Timberking 1220 came packaged in a crate made from 3 sheets of 1/4” plywood, a stack of 1X4’s, 2 1×6’s, and several 2×4’s. The day I posted the project, I parked my trailer under a big maple tree in my front yard so I could hoist the saw head over the base sections. The first day I only had time to get most of the wood off the crate and position the new sawmill so I could start pulling it into the a...
I spent the day metal working… But it’s going to make my woodworking easier. I needed a way to lift big logs onto my sawmill and to turn them while sawing. So, I took some steel channel material and some flat stock and welded them into a support stand. Now that I’ve made one welding project, I have many more projects that I’ll need to weld. Now that the metal work is finished, I’ll add a 4” X 6” white oak beam to the bottom steel plate to fit under...
I’ve spent the entire day cutting trees into logs and bringing them home… They aren’t lumber yet and all of them are not here yet, but it won’t be long now. Here’s a couple of shots of the maple. It’s a little over 30’ long and the big end is 36”. It’s been down a year and it’s spalded, but not punky. I cut into it to see what it’s going to look like after it’s sawn. It’s also tiger striped through and through. I...
This weekend, I spent my time bringing home some walnut and maple logs. The limbs don’t make good lumber, even if they are big enough to make a saw log. Limbs are reaction wood and when you remove the weight from them they move, sometimes a lot! Saw a horizontal limb into lumber and you can make some nice pretzels and you won’t have to do anything… Just saw ‘em and watch ‘em curl. Same deal with leaner logs. I use some of the limbs to make bowls, rolling pins and...
- My Journey As A Scroll Saw Pattern Designer - 1562 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1587 entries
- frank - 417 entries
- degoose - 395 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 276 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 188 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 175 entries