Just for giggles, I did a standing coin test with the Nova DVR-XP. Many of you know, this is a new toy…er tool to my shop. I haven’t gotten a lot of time to enjoy it, but I have done a few things. The lathe is fantastic, smooth, lots of power and is a significant upgrade to the lathe I had before. In this series, I’m going to demonstrate some hollowing tools including the famous Termite and the Proforme Hollowers. In this little video, I just do the coin test. The LCD ...
http://www.youtube.com/watch?v=ZtsG3iuAzMU been using this Bosch GEX 125 sander for a year and have been happy with it, since everybody is raving about Festool i decided to buy their 125mm version, the RO 125.i put both to the test in my daily type of work, and it turns out the Bosch IN MY CASE is more productive.all that matters to me is doing rapid and comfortable work. usully with these kind of tool tests or comparisons you will see someone showing you how fast their Rotex can sand s...
I posted two projects related to the dust collection system designed into this mobile workbench. Click the links for the compact Thien dust separator and the rotary blast gates. The dust separator seemed extremely effective with almost no carryover to the vacuum. I was anxious test and document how effective, so I followed the example of some LJers and set up a test. I measured the contents of the dust separator bin and dumped it on the floor. I also swept up the shop floor which included ...
I’ve been wanting a shaving bench. And since i can’t help but contemplate the design concepts behind what i’m about to build, i contemplated the fundamentals of how a shaving horse works. I thought “Great. But why not like this?” .. as an alternate mechanism for clamping a work piece in position sprang to mind. The contraption looks to me like a giraffe stretched out to drink, or the head of a giraffe, so I call it the shaving Giraffe rather than shaving Horse. W...
Today I took my board game case out on a trial run. I learned a few things. People things it’s funny when you carry a large box around your neck and I need some handles. I also applied some magnetic paint and then a layer of chalk paint on the inside of the front board. I decided it being magnetic I can keep score sheets posted as well as write in chalk the score of the game. After the drying we put it through a test run and it works out great. I am excited for this project to be comple...
We had the day off today at the office, so I figured this is as good a time to spray some finish. Fist thing first. I had to setup a way to spray while keeping the area somewhat separated from the rest of the basement in fear of contamination of the rest of the things. I also wanted to have a way to rotate the work so that I can spray all sides without having to walk around and being in the direction of the air flow (I have a box fan in the window to pull out the overspray etc. I initia...
This is from nearly a month ago. I’m behind on my adventures. Chucking something properly in a lathe takes a little bit of thought and prep work. I only had about an hour after work, but was in the mood to learn a bit more. In this test, I simply wanted to see if I could make a thin, dish-like object in a small chunk of Indian Laurel (Ficus microcarpa). I had recently acquired a ton of it, so I just pinched it between centers and had at it. The test dish I would turn was from a pi...
I wanted to finally do a review of my bandsaw, so I asked the gang here what sort of things should I be testing? After receiving the replies I set out to see what my band saw would do. No so fast there! When I know the saw is capable of re-sawing a 2×4, but when I tried raising the blade guard to do just that, it topped out at about 3 1/4. I knew this was not right. After a few minutes I identified the problem. The upper blade guide assembly was too far forward and was hitting t...
I’ve been thinking that I’d like to post a review of my Skil benchtop bandsaw. The thing is, I don’t use it all that much and I’d hate to misrepresent the tool one way or the other based on my moderate use of it. So what sort of ‘tests’ should I put the saw through to see how it performs? I also don’t have a lot of experience on the saw and don’t want that to color my review.
OK, since you DID open this, you will given 5 lashes with a wet noodle. This is strictly a test… Al
- My Journey As A Scroll Saw Pattern Designer - 1539 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 94 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1564 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 268 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 169 entries