LumberJocks

Woodworking blog entries tagged with 'tenon'

  • Advertise with us
View Retsof's profile

Outdoor Furniture #10: Patio Planter Boxes - Day 1

06-05-2012 02:04 AM by Retsof | 0 comments »

I started a new project today. I’m building two large patio planter boxes. The final dimensions should be close to 41” long x 24” wide x 20” high. I’m working from Woodsmith’s Outdoor Woodworking book. Here’s a link to their website: http://woodsmithstore.com/w1021.html There were a lot of cuts to make for this build. The diagrams for this project are pretty detailed and that’s a good thing because there is no cut list provided....

Read this entry »


View TheArtisanWoodshop's profile

Writing/Art Desk Project Video

12-31-2016 04:52 PM by TheArtisanWoodshop | 0 comments »

Hey Guys, A co-worker of mine asked me to build an art desk for his daughter for Christmas. He gave me a general idea of what she wanted, and let me go on my merry way to creating the piece shown in this video. The Joinery it features is Hand cut DovetailsMortise and Tenon joineryThrough TenonsStopped DadosDowels So please check out this video and leave me some comments here on what you liked or disliked about the table or the video so that I can improve. Looking forward to all th...

Read this entry »


View DustyMark's profile

Building a Dr. White's Chest #9: Turning Knobs

05-12-2013 09:37 PM by DustyMark | 0 comments »

I like to turn the knobs on the cases I build. Dr. White’s chest has a total of twelve knobs. I’m not a skilled turner, but that hasn’t stopped me from building a lot of furniture with turned parts. Turning a batch of knobs that is “identical” could drive a turner to another hobby. However, it’s not too difficult to turn out a batch that matches “close enough.” Remember, this is a handmade project and hand-turned knobs scream craftsmanship. Watch this video to see how I turn out the kno...

Read this entry »


View pintodeluxe's profile

Mission Dining Build #4 - The Table

11-17-2011 08:01 PM by pintodeluxe | 0 comments »

The dining table is well underway, with the frame assembled and equilizer slides installed. I think there are some misconceptions about equilizer slides. They work for pedastal tables, or any design where the legs are stationary when opening the table. I had to do some searching to find slides that would accomodate this 46” wide by 104” long table. It will have two 12” leaves, and is 80” long when closed. The other spec I needed was...

Read this entry »


View dskill's profile

Building an Arts and Crafts Writing Desk

12-20-2011 04:11 AM by dskill | 0 comments »

Several years ago I ran across an old book of Arts and Crafts style plans and copied the pages of the book containing the drawing (yes, just one drawing!) with dimensions and three paragraphs of instruction on how to build the desk. This past summer I finally purchased the rough quartersawn white oak and dimensioned it for the pieces of the project. One of the biggest lessons I’ve learned (belatedly) from starting this project is that apparently even the casual hobbyist woodworker of ...

Read this entry »


View HuckD's profile

Videos by HuckD #18: Dowel Jig 3

01-27-2016 07:20 AM by HuckD | 0 comments »

My third dowel jig. This one for edge joining boards for table top glue ups. Simple, inexpensive and easy to make. https://youtu.be/MLMpO8BQfFk

Read this entry »


View A Slice of Wood Workshop's profile

Layout and Cut Tenons with ease!

04-09-2016 03:26 AM by A Slice of Wood Workshop | 0 comments »

After the mortise video, I had a few questions about how to create the tenon. Here is my version.

Read this entry »


View ScottShaeffer's profile

How-To Make Log Furniture #2: How-To Carve a Tenon

01-31-2013 07:35 PM by ScottShaeffer | 0 comments »

Tenon cutters are quick but sloppy. See how-to carve a tenon using a draw knife that will look great and fit tight! See the full tutorial by following this link: http://logfurniturehowto.com/tutorial/learn-how-to-carve-a-tenon/

Read this entry »


View RaggedKerf's profile

My First Workbench #12: Day 12: More mortises.

08-24-2012 01:36 AM by RaggedKerf | 0 comments »

(Only one picture for this short update today so I decided to post it here too!) Nothing special today, just more working on chopping mortises and 3 more tenons…lots of sawing. Lots. But I have to say I’m seeing a little improvement in my abilities to feel when the wood is telling me I’m going to fast or off angle on the saw strokes. It’s getting easier to saw too—-I’m not putting near as much pressure as I did on the first cut of this project. It f...

Read this entry »


View TheGravedigger's profile

New "Little Good Pieces" blog post - Tenon Shoulders Made Easy

12-16-2010 06:12 PM by TheGravedigger | 0 comments »

There’s a new post on the Little Good Pieces blog – Tenon Shoulders Made Easy. Read about my trick for sawing tenon shoulders by hand. Check it out! http://littlegoodpieces.wordpress.com/2010/12/16/tenon-shoulders-made-easy/

Read this entry »


« prev 1 ... 14 15 16 17 18 next »
171 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com