LumberJocks

Woodworking blog entries tagged with 'teak'

  • Advertise with us
View WoodJediNTraining's profile

Make a Screen Printing Press to Print T-shirts in the shop or at home

09-19-2012 12:11 AM by WoodJediNTraining | 5 comments »

Along with Woodworking, I enjoy a new hobby, Screen Printing T-shirts. I started a New Foundation for woodworkers Across the globe to unite and connect. And I am starting to print T-shirts for the UFOWW and found a need for a screen printing press. So here is a look at that build Also I had a short follow up on some notes about the press and why im posting a day early..

Read this entry »


View SmartCutter's profile

Carpenter Pro - Cutlist Diagrams for iPad/iPhone with Wood Grain Direction Control & Muliple Stock

12-24-2011 08:56 AM by SmartCutter | 7 comments »

After a month of development based on the feedback I got here, I finally managed to release Carpenter Pro, this time, it calculates how many plywood sheets are needed to finish your project and get detailed cutlist diagram for each stock sheet needed. It allows you to specify the dimensions & grain direction for your stock sheets material, specify the dimensions and the required grain direction for each part you need to cut for your project, and set the kerf amount, then watch this app ge...

Read this entry »


View KoryK's profile

Intarsia Basics #5: Welcome back, Let's Start Adding Spacers and Shaping Our Pieces

05-24-2012 03:01 AM by KoryK | 11 comments »

Thanks for joining in again and I apologize for the delay. Hand is doing a lot better and it feels great to be back in the shop. Thanks for your patience and your encouragement to get better. In this section we will focus on shaping and sanding our pieces. In my opinion, this is the most important part of the process. Depth is what makes a piece really stand out and the more depth you use in your project the better you’re going to like the end result. We have all seen intarsia pieces...

Read this entry »


View ghost5's profile

Game Calls #1: Turkey Friction Call

02-26-2013 12:42 PM by ghost5 | 8 comments »

Well, thanks to the comments and questions I have gotten I dug through my pics to find one I had on how to make a pot call. So for the folks that want a quick tutorial here we go. A pot call is basically a shallow dish containing two ledges inside. One is cut into the rim to hold the playing surface while the second is a ring left in the center raised to clear the bottom of the pot and still leave a space between the sound board that rests on it and the playing surface above it. One thi...

Read this entry »


View WoodJediNTraining's profile

Build a Finger Joint Jig

05-23-2013 04:35 PM by WoodJediNTraining | 15 comments »

Recently I posted a video covering common woodworking joinery ( http://www.youtube.com/watch?v=zqXLYe783qw ) with the help of a few friends. In that video I talked to you all about making finger joints on the table saw and showed you a finger joint jig in the process. Well as I promised, here is the complete build process of that Jig. Table Saw Finger Joint Jig Also a little reminder about the 2nd Annual Whirligig Wars. It is almost here!! The event Runs from July 10 –...

Read this entry »


View WoodJediNTraining's profile

My Laguna Whirligig / Whirligig Wars Contest

07-19-2012 07:26 AM by WoodJediNTraining | 2 comments »

Well guys after 2 days I finished my first whirligig ” Man cutting wood with a Laguna Bandsaw. If you would like to be part of the Whirligig Wars Woodworking Contest. Visit A Simple Design of Ocala for more information or check out my blog entry “Whirligig Wars Project contest” here on Lumberjocks to watch the video.. Hosted by Steve Ramsey of woodworking for mere mortals and Myself with prizes from Laguna Tools, Woodworkers Guild of America, Rockler Woodworking, Steve R...

Read this entry »


View KoryK's profile

Intarsia Basics #6: We are Almost There!!

06-25-2012 01:00 AM by KoryK | 14 comments »

Welcome back and again sorry for taking so long to get this post out. After my hand healed I was really backed up on some other projects. I’m almost caught up and will post some of those projects on my page in the next couple of days. When we left off we had all the sanding done and are ready for staining and finishing. I’m making two of these frogs, one that will need staining and one out of exotic wood so everyone can participate in this project. We will go over staining next. I’m...

Read this entry »


View WoodJediNTraining's profile

Make a First Aid Cabinet For the Workshop

05-03-2013 06:39 PM by WoodJediNTraining | 5 comments »

When a viewer sent me a comment asking if I could make a First Aid Cabinet for the workshop, I thought to myself. “Yea what a perfect project to do”, because I am setting up the new shop, and it was the one thing missing. The First aid Cabinet was made almost entirely out of Pallet Wood. Oh yea! my first Pallet Project! http://www.asimpledesignofocala.com – Websitehttp://www.ufoww.com – The United Federation of Woodworkers Member Sitehttp://www.twitter...

Read this entry »


View WoodJediNTraining's profile

Make a Simple Lift Lid Box

03-29-2013 10:26 AM by WoodJediNTraining | 9 comments »

In this video I show you how to make a simple yet elegant lift lid box. These little boxes can be made with with different woods to give them their own character, and due to the simplicity they can be made in batches.. They make a great gift to give someone. The boxes in the videos are made from Spalted Pecan, White Oak, & Mahogany. Each Box was finished with 2 coats of Danish Oil to bring out the natural beauty and color of the woods. Also in the video I talk about an upcoming project...

Read this entry »


View WoodJediNTraining's profile

Shadow Casting Lamp

09-12-2012 04:59 PM by WoodJediNTraining | 7 comments »

This shadow casting lamp creates a cool effect to any room by casting a shadow on a wall of any scene you’d like to create in the lamps silhouette panels. For this project I used horses. The front of the lamp shows a horse in a natural calm state on all 4’s . And the frosted front panel of glass gives a nice subtle tone of light to illuminate the room. The back of the lamp has a silhouette of a horse raring on it’s hind legs. This is the side that casts a shadow on...

Read this entry »


« prev 1 2 3 4 5 ... 10 next »
98 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com