I wanted to share my experiences in making landing nets with you. This is from an article I wrote for the August 2010 edition of On The Fly, the newsletter for the Fly Fishing Club of Orange County. Building the Perfect Landing NetBy Greg Madrigal Like many of you, I started fishing when I was very young, and something about it never let go of me. Growing up with 5 sisters left our family with little to no money most of the time. Work for my father was hard to come by growing u...
Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....
Intro: Hello to all and welcome to the first installment of Intarsia Basics. Before we can start cutting we need to select the wood we want to use and get our pattern ready. Wood Choices: I prefer to start with stock that is one inch thick because that gives you a lot of depth that you can work with. It will require a little more sanding on some areas but it will help to give your piece a 3D look. It is your choice if you prefer to stain your wood to achieve the colors or use exot...
I recently finished working on a cutting algorithm app for the iPad and iPhone called Smart Cutter, and wanted to share the app with every one hoping get some feedback from carpenters and wood workers. Smart Cutter finds the maximum number of small pieces cut from a larger sheet of paper with minimum scrap. It employs a state of the art algorithm to generate the maximum number of small pieces cut from a larger sheet of paper, wood, cloth or any other material, with minimum waste. Whether y...
This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...
Thanks for joining us for the third installment of “Intarsia Basics” and this is where it starts to get really fun. Cutting out the pattern is one of the best parts of doing this kind of art. It takes a little practice to get used to using your saw. You can look up some practice patterns or just make some zig zags, loop the loops, straight lines, gentle curves, and circles on a piece of paper and glue to a practice board. Cut out some of these and you will start getting used to the “feel ...
Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
After a month of development based on the feedback I got here, I finally managed to release Carpenter Pro, this time, it calculates how many plywood sheets are needed to finish your project and get detailed cutlist diagram for each stock sheet needed. It allows you to specify the dimensions & grain direction for your stock sheets material, specify the dimensions and the required grain direction for each part you need to cut for your project, and set the kerf amount, then watch this app ge...
I just wanted to update on the status of the class and inform every one of the delay. For those of you that do not know, I had a misfortunate (stupid?) accident and broke a bone in my right hand a couple of weeks ago. I was hoping that I had progressed far enough beforehand that it would not affect the class. Unfortunately the bones are not healing correctly and it is taking longer for ir it to heal. I tried again tonight, but do not have enough dexterity or hand strength to sand while I...
Along with Woodworking, I enjoy a new hobby, Screen Printing T-shirts. I started a New Foundation for woodworkers Across the globe to unite and connect. And I am starting to print T-shirts for the UFOWW and found a need for a screen printing press. So here is a look at that build Also I had a short follow up on some notes about the press and why im posting a day early..
- My Journey As A Scroll Saw Pattern Designer - 1631 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1656 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 227 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- robscastle - 188 entries
- BritBoxmaker - 188 entries
- Rustic - 188 entries
- Chris Davis - 184 entries