LumberJocks

Woodworking blog entries tagged with 'tasmanian blackwood'

  • Advertise with us
View andyboy's profile

Nakashima Night Stand part 3 #1: Nakashima Night Stand. part 1

484 days ago by andyboy | 5 comments »

It was nice using some harder timber for a change. Tasmanian Blackwood that I found on our river bank after a strong wind in 2009. I also changed from my usual 1:6 angle for softwoods to the preferred 1:8 for hardwoods.Very pleased with the results!!!

Read this entry »


View degoose's profile

Open weave Lazy Larry #6: A crosscutting video...

1101 days ago by degoose | 20 comments »

No explanation required… just watch.. Here is the dry fit after all the pieces have been cut… I did not show the cutting of the background Huon Pine peices .. I figure you know how this was done…. all cut at the first stop.. and again keeping them in order for grain flow…

Read this entry »


View degoose's profile

Open weave Lazy Larry #1: Ripping the stock.

1108 days ago by degoose | 12 comments »

I am about to make an open weave Lazy Larry…similar to this one. I have ripped some Tasmanian Blackwood into the required strips….. these are just over 600 mm long and 50 mm by 20 mm For our American cousins… 2 feet long and 2 inch by 3/4 inch.. Tomorrow I will be ripping some thin stripes of Huon Pine and Tasmanian Blackwood to make the accents… Strips will be only 3 mm thick [ 1/8 inch] The background will be Huon Pine….. cut into 50 mm squares̷...

Read this entry »


View moshel's profile

wood gloat #2: Tasmanian Blackwood

1361 days ago by moshel | 9 comments »

One of my fellow LJ’s drew my attention to a sale on trademe (our local ebay) of a log of Tasmanian blackwood. I made a bid on it and to my surprise i won! the auction was for 3 lengths of 2.5 meter, ~50-60cm diameter. the tree was over 100 years old. I went there yesterday and started to mill with my alaskan – it was very hard work – this timber is hard!By the end of the day I had 5 nice slabs, 7cm thick and I am not even 1/4 way through!!!! I couldn’t resist the t...

Read this entry »


View degoose's profile

Just a small how to.

1778 days ago by degoose | 24 comments »

This board is not part of the 150.. I showed one of the 150 to a friend and she wanted one but a little larger,This is the way it was made.Cut some bits of board. NGR SA TBDress all sides.This is to see the way it will look with the stripe. Cut all pieces to 250 mm.Join the NGR and edge with TB on one and SA for the other.Glue a sacrificial board to the SA prior to cutting the arcs.This is the arc cutting jig.. a slight variation on the patron jigSet the stop with a nail… high tech I kn...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase