Hey LJ! Sorry to anyone who got the wrong video first time they viewed, I embeded the wrong video but that has now been rectified. I am by no means what you would call an experienced hand tool user and I tend to use them in conjunction with my powertools. Nevertheless following a hand tool project where I made some bookends which I did a few weeks ago… you can check that out by clicking on the link… Here! Anyway after that video I was asked about cutting dovetails so here...
Last week I received my Veritas dovetail saw and planned on having a dovetail practice session this past Labor Day weekend. Saturday, after straightening out my shop, I got out all of the tools that I would need and laid them on the work table near the front vise. I always have plenty of maple at the plant so I had brought home several pieces of soft maple that had been surfaced 4 sides to 3/4 in. x 5-1/2 in. I planned on making 4 practice corners and to take a break after completing each ...
Today is a national holiday (it’s Eid ul-Adha, the big Muslim holiday celebrating Abraham’s willingness to sacrifice his son) and I was able to get in a little shop time today! But first, define shop. I needed to work on my dovetails for the aprons on my Lego Table, but had no place to do any vertical clamping. So out to the balcony I went. And voila! I had to use one of the little metal vertical bars (you can see one on the far right of the above picture) to support the ba...
Okay, so you’d think that doing the dovetail joints would have been the hardest part of this box, right? Me too. I figured on this nice leisurely Sunday afternoon, I’d do the simple task of cutting the rabbets into which the box bottom would fit. Then I’d glue the dovetails and heck, maybe even glue the bottom on. But it turned out to be not so simple, and after much groaning (and nearly cursing), I’m left with two busted pins and only one rabbet done. See, I realiz...
So I’ve finally gotten the walls of the box flat. Well, mostly flat. They still wobble just a bit when I put them together, but I don’t want to plane these things down to wooden cards trying to get it just right. Plus, it’s not like I’m face-gluing them together. When they’re joined together as a box, I think the variance will be negligible. Two of the walls were 1/32” thinner (on average) than the other two, so those were the ones I cut down for the sh...
- My Journey As A Creative Designer - Woodworking and Beyond - 1729 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Life as an Amateur Woodworker - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1754 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 301 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 238 entries
- Betsy - 228 entries
- stefang - 213 entries
- Stevinmarin - 212 entries
- robscastle - 207 entries
- Todd A. Clippinger - 207 entries
- Dave Rutan - 206 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries