Hello. I have now finished the tail vise, and today I had acually started work on the base. After I had got the dovetails for the tailvise fit and the pins on the guide rod I cut out the place for the pins to be inserted in the vise assembly. I then started work on getting the notches cut in the guide blocks for the sliding parts. Here you can see the guide rod in place, with the one guide block attached to the end cap with a notch for the guide rod to slide through aswell as a small notch...
Hello, this is probably my last workbench blog entry, now that my bench is complete! Like I said in my last blog, the workbench has been complete a couple weeks before this post on November 12. With my last post I had wrote about completing the base. After I had the base assembled, glued up, and drawbored I placed the bench top onto the base. Previous to putting the top on the base I had put one coat of boiled linseed oil on the underside of the top. The top is removable from the base, I deci...
I was fortunate enough to be able to take off Christmas week and get a good start on my workbench. I’ve had the idea to build one in my head for a few months now, and have been slowly accumulating the parts and hardware necessary. My intention was to make it possible to take the bench apart and move it with relative ease since I will be moving it from my dad’s shop once I have a shop of my own (side note: apartments suck). I used southern yellow pine, special ordered from Men...
Hello. Its been 6 months since I finished my bench and I have spent over 1000 hours on it. Now that I have gotten a good feel for how the bench works and its ups and downs I thought I would write an update on it. To start I’ll mention the modifications I made. The first was to add leather to the pads on the hold fasts. With leather I no longer need to place scrap wood between the work pieces and the hold fasts to prevent denting. If you have hold fasts (which you should) I would r...
Well, after a VERY long break from actually working on my new bench (and some other projects) I have finished my second Masters degree and can now get back to more important things. Even though I wasn’t able to work on anything it didn’t keep me from thinking, and dreaming, about my date with Monsieur Roubo. I have had the 6”x6” wood for the legs in the garage for about 6 months so it should be dry enough for me to start on some of the joinery and I purchased 4”x6” wood for the stretchers a...
...using a vise screw like this http://www.leevalley.com/US/wood/page.aspx?p=41664&cat=1,41659 what do think? will it rack?
Now that I received the tail vises for my workbench, I have modeled them in Sketchup so that I can play around with it for a more precise location and drilling plans before I have to physically deal with the heavy top material. This model is design to be light and fast, and as such does not go into vast details such as screw spirals etc. Instead it is designed to be used for measurements and sizing, both in terms of the actual hardware measurements and shapes, and screw hole locations. ...
So I decided to breakdown and build a workbench for my super small shop. It was a hefty decision, considering I’m working in a single stall garage from the 50’s that barely had enough room for my sedan from the beginning. But it seemed to me that a workbench was a must if I wanted to take fine woodworking seriously at all. With that being said, I also didn’t have the time, space or skills to plane tons of boards to an exact thickness and insure a quality top after it was ...
When you’re building a traditional piece of furniture, it makes sense to keep everything… well, traditional. You wouldn’t put a digital face on a Townsend clock. But a workbench is different. We built our bench in the Roubo style for its features more than the old-timey tradition. (Watch our 2X6 Roubo woodworking bench videos here) So equipping it with a modern vise isn’t sacrilege, it’s a no brainer. The only question is, what kind of vise is right for your bench. There are primarily two kin...
I need some information on building a tail vise. I bought the components on Ebay but there are no instructions. Never mind. Found it. Thanks
- My Journey As A Creative Designer - Woodworking and Beyond - 1782 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Toy costruction - 106 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Woodworking on a Half-Shoestring - 77 parts
- Sheila Landry (scrollgirl) - 1807 entries
- dbhost - 432 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 307 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 235 entries
- Dave Rutan - 228 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 204 entries
- Smitty_Cabinetshop - 195 entries