LumberJocks

Woodworking blog entries tagged with 'table'

  • Advertise with us
View Martin Sojka's profile

Thorsen Side Table Challenge #1: Announcement

03-18-2007 04:44 PM by Martin Sojka | 109 comments »

Thanks to the creativity and hard work of Karson, Mark and Michael we are starting our first unique Woodworking Challenge! Karson sent the proposal to Glen Huey, Senior Editor of Popular Woodworking and asked him for their support in this challenge. Glen whole heartily agreed. Karson's proposal was to use the cover project from February 2007 issue #160 of Popular Woodworking - Thorsen House Side Table - as our challenge. When we have the Summer and Winter Awards everyone builds their o...

Read this entry »


View MsDebbieP's profile

Table Challenge #3: First stages

03-31-2007 12:41 AM by MsDebbieP | 70 comments »

Martin has asked for blogs re: the big table challenge and I figured that since I am tracking the process of this “creation” I might as well follow the journey with some photos. I re-read the rules to see if I was breaking any rules by posting the progress but I didn’t see anything that indicated that this was a “no-no” .. so here is the progress! Photo 1: The Beginning The table will be mostly willow of course (Hey, Chip – here’s my addiction o...

Read this entry »


View PurpLev's profile

Work(shop) in Progress #6: New Table Saw : Unpacking and Assembly of Ridgid R4511

03-22-2009 05:01 AM by PurpLev | 50 comments »

So after much research and debates, I have finally charged the card, and 2 days later the delivery arrived with the new saw in the box (I opted to have it delivered from the store as opposed to pick it up myself – at 450lbs, I simply wouldn’t be able to unload it myself) Delivery from HD was swift and smooth, positive and friendly guy stop at my place saturday morning, and helped me position the box in my garage – I couldn’t be happier (took 5 minutes, 4.5 of those was...

Read this entry »


View PurpLev's profile

Router Table #1: Design ideas, need some feedback

02-18-2009 09:44 PM by PurpLev | 43 comments »

OK, so yeah – another blog about a router table, but since I’m going to make one , might as well document it while I go, maybe someone can benefit from this. I’ve had a Rockler router table top + plate + fence which I got when I bought my router (Bosch 2 1/4hp). It had the misfurtune of being on the floor when my basement was flooded a couple of years ago, so that top was ruined. I since have been planning to replace it with a shop-built version, and make a full enclosed ...

Read this entry »


View Dick, & Barb Cain's profile

Thorsen Table Challenge #7: Going for the Top !! Also pegging joints info.

04-25-2007 04:30 PM by Dick, & Barb Cain | 33 comments »

The last couple of days, I’ve been working on the tabletop. I mortised out the breadboards, & cut the tenons. I kind of fell for the cloud lift theme, so I incorporated into the top. You might want to call this a sideways cloud lift. I decided to try something from the latest issue of Fine Woodworking, They call it draw bored pegging on the breadboards. This is something I’ve never tried before, so we’ll see what happens. Check out my latest Video, hope you ...

Read this entry »


View Martin Sojka's profile

Virtual Dining Table Challenge #1: Announcement

09-04-2007 09:54 PM by Martin Sojka | 32 comments »

View all current entries In order to continue challenging us to develop our creativity and woodworking skills let me present another challenge to you, with the support of Popular Woodworking. Google SketchUp is a powerful yet easy-to-learn 3D software tool that is currently being discussed in each woodworking forum or group. Yes, it can save you costs during the designing phase and it will boost the creativity of your finished pieces when you master it. And what’s the best ...

Read this entry »


View TopamaxSurvivor's profile

Sharpening Table Saw blades by hand and cutting nails

12-20-2010 08:52 AM by TopamaxSurvivor | 30 comments »

I decided to sharpen the firewood/ pallet blade today. It was cutting pretty slow. Thank goodness it is a combination blade without too many teeth. While I was filing, the first time I have tried this by the way :-)), I thought I should have put the blade on backwards and jointed it with a file. Has anyone ever done this? 20 minutes after fininshing the filing, I hit a nail!! Murphy’s law, I thought about that before I filed, but it did cut very well and I could defiinitely tell ...

Read this entry »


View Smitty_Cabinetshop's profile (online now)

Refurb, Antique Walnut Table #7: It's Mahogany, and it's Done!

02-10-2013 11:13 PM by Smitty_Cabinetshop | 30 comments »

Here’s the top before any of this started. After dis-assembly of the top from the base, jointing the edges, re-gluing, re-attaching, scraping and re-re-re-finishing (thanks again, Andy!), this table got the fifth and final coat of 3-2-1 and is DONE. Now to find a place for it in the house, because it’s too nice to sit in the shop! Thanks for looking.

Read this entry »


View Lee A. Jesberger's profile

Proud of my Buddy #1: First attempt at carving

08-03-2007 12:59 PM by Lee A. Jesberger | 29 comments »

Hi all; I always mention my buddy Bruce, and here’s a post dedicated to him, (even though he’s still alive) knock on wood. He has no experience in wood carving, other to set a hinge or something. When we were building the Philadelphia Pie Crust Table, he would work on parts like turning the post, laying out the pattern for the top, as well as cutting it out and hollowing the middle of it with a router. The 1 inch thick board becomes about 5/8 inch in the middle are...

Read this entry »


View John Nixon's profile

Design Decision - need YOUR help

07-06-2007 02:49 AM by John Nixon | 29 comments »

I am trying to decide on the style corbel that should go on the pool table legs that I am building. Short one: Long One: Which one do you think looks better? Thanks for your input! John Nixon – Buffalo, NY – www.EagleLakeWoodworking.com

Read this entry »


1 2 3 4 ... 42 next »
414 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase