What do you guys think of a table saw sled with a removable insert for different blades, and blade angles? This is just something I put together really quickly in Google Sketchup – not very detailed and not the final design – just demonstrating an idea. I can already think of a few problems such as the fence will get ripped up with the different blades/angles. I don’t want 8 table saw sleds laying around the shop. I figured it’d be much easier to just make one...
Hey guys. Just fooling around in the shop. Got tired of the wooden rails on my table saw sled expanding and shrinking, therefore making the table saw sled less accurate. I’ve never seen anyone on here (even though i’m sure there are) use metal rails for their sleds…..so i figured I’d give it a try. This was just an experiment – but it turned out even better than I thought it would, so i’m going to use it (even though I’ll probably change a few thi...
I decided to make a new sled. One that addresses some problems I had with my old one. Mainly, it’s much smaller and lighter.
Since it seems to be the season for table saw sleds I thought I post a video demo of my table saw sled and like to point out some of the features that sets it apart from other sleds .Some of the features are a double sliding bottom,full tilt of the blade range with zero clearence ,dado capability and several others .http://lumberjocks.com/projects/61820Here is the link to the video and it will explain all the features better than I can explain here . https://www.youtube.com/watch?v=70C...
My second blog in this series is an adjustable sled. In a perfect world a sled would stay spot on accurate for ever. In the real world however things go wrong for various reasons. To overcome this problem I thought about a sled with a fence that could be adjusted when it goes out of square for whatever reason. Then I saw Dave's Super accurate crosscut sled here on LJ. This was also the inspiration for the SketchUp model which can be downloaded over here The other reason is that I found tha...
- My Journey As A Scroll Saw Pattern Designer - 1541 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 94 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1566 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 268 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 170 entries