Totally set up R4512 cast iron table saw. Lee valley brand router table insert 05J25.01 router is a BOSCH 1619 EVS which is a beast. Outfeed table out of three door hinges and a piece of planed to thickness 2×4 and 5/8 birch MDF. Recycled front fence from old crosscut sled. Maple with a T-slot extrusion. NOTES:1) If you tighten the blade lift handle with the center nob the blade misalignment goes away! I figured mine was good as I ALWAYS tighten mine (Prevent lifting with a ...
On my walk this morning I paused to admire the Willamette River. It is wide and this morning it was quiet, peaceful and full. As always it was flowing past me, underneath my footbridge. The body split apart and came back together again with grace and ease. After admiring it’s awesome beauty I was reminded of my work and the feeling of running in place. On the surface the river looks so peaceful so laid back like nothing is really going on. It’s so full that rapids aren’t even showing whe...
Like many woodworkers, you will find roller stands in my shop for extra material support. I do not like the single roller stands, I prefer the stands that provide support with 3 or 4 rollers. This type of roller stand provides a larger surface and better support. The particular set of roller stands that you see here is the Craftsman brand from Sears. They cost about $70 each several years ago. But I am still not satisfied with the performance of roller stands on their own. One of th...
I was working on fitting the skirt to the front of the bench, and it looks fantastic. in order to get to the final dimensions of 30” width of the top, I’m missing 1/8” extra material between the benchtop and the skirt to fill in the gap, while keeping the skirt flush with the legs fronts. so far so good. while fitting the skirt to the legs, I noticed that the gap on the left side of the bench is larger than the right side… a quick reach to the tape measure confirmed...
I’m sort of sad this week. It’s just frustrating to me, what is happening now. In the big sense, and the little Lumberjock sense. An artist and L-J’er that I greatly admire, Thomas Angle, can’t find anyone to buy his work, and he has shut down his business operation That sort of just stinks, and should be a huge red flag for any of the rest of us that try to sell our handmade work for a living. He can work leather, and combine it with wood like few have ever d...
OK, so yeah – another blog about a router table, but since I’m going to make one , might as well document it while I go, maybe someone can benefit from this. I’ve had a Rockler router table top + plate + fence which I got when I bought my router (Bosch 2 1/4hp). It had the misfurtune of being on the floor when my basement was flooded a couple of years ago, so that top was ruined. I since have been planning to replace it with a shop-built version, and make a full enclosed ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1730 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1755 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 301 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 238 entries
- Betsy - 228 entries
- stefang - 213 entries
- Stevinmarin - 212 entries
- robscastle - 207 entries
- Todd A. Clippinger - 207 entries
- Dave Rutan - 206 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries