I hesitate to do this, that which I am about to do. I don’t fancy myself as a good carver, or a great picture drawer. Especially with so many lumberjocks that are great carvers here that will see this. On top of that, there are so many great carvers on the internet that will stumble onto this blog because they surf the net. With that said, after Mark Mazzo asked about the process I go through to do a carved panel like this one, I thought about it for awhile, and decided to show th...
I hit this with my lawnmower while mowing between the rows of trees on my treefarm. For a little more… http://www.stoneaxe.biz/About_Us/about_us.html
After about half of the tour it hit me at how much different the architecture was in Switzerland than here in the good old USA. When I sat back and really thought about it Switzerland is around 500 years older than us and they shouldn’t be like us.
Hello. Here’s my disclaimer! Let me start by saying: wear respirator protection throughout this whole process! This is dangerous dusty work, and I claim no responsibly for what you do with this information. This is just an account of what I do. It took me awhile to figure out the inlay piece, and I’m more than willing to share what I’ve learned. Ive attached rock crushers and a pic of resin and rock on a scrap to my projects section- im just not up to speed on this HTM...
My wife and I have been working with Turquoise a good bit in our wood turned works. The project titled “Blue Starburst Bowl” received some great feedback along with a couple requests for a blog on our process of inlaying with natural stone. Unfortunately we have never set out to formally document our process so we don’t have any photos of intermediate steps. Therefore, I’ll do my best to describe the steps in detail. Starting outFirst you need something to inla...
Special thanks to the inspiration I found from lumberjock Scott Shangraws projects. (http://lumberjocks.com/shangrila) I started with a half round chunk of juniper fire wood. A few hours of carving with a chainsaw, then my angle grinder with a round chainsaw attachment, and finally a 40 grit flap wheel grinder and here is what I have. I used my dremel tool to route out any cracks, and added a few more lines as my mind saw fit to add some stone inlays for both something interesting t...
Well, I have not had much time to work in the shop this week. My chunky boxes are just waiting for final sanding and finish, but I can’t seem to get the free time at home right now. Maybe this upcoming long weekend, with it being Rememberance day on Monday. But I did manage to swing by the local PrincessAuto yesterday on my way home, and I walked out with a cheap $12 diamond-plate sharpening block (on sale). It has four 2×6 sides, each with a different grit (200, 300, 400, 600)....
Earthly Pleasures is an online exhibition at Crafthaus.com curated by us. We received 65 fantastic submissions, sadly could not use all of them. Artists from Bali, Canada, France, Germany, Japan, Portugal, and the United States made the pieces we selected. The artists in the exhibit: Claudie Bastide, Harriete Estel Berman, Fred Johnson, Norine Kevolic, Tadashi Koizumi, Gabrielle, Kunze, Joshua Lynn, Warren Moeller, Tom Muir, Norman Pirollo, Frances Scott, Tom Skaggs, Robbin Smith, Frances...
- My Journey As A Creative Designer - Woodworking and Beyond - 1730 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1755 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 238 entries
- Betsy - 228 entries
- stefang - 213 entries
- Stevinmarin - 212 entries
- robscastle - 208 entries
- Todd A. Clippinger - 207 entries
- Dave Rutan - 206 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries