LumberJocks

Woodworking blog entries tagged with 'steamer trunk'

  • Advertise with us
View thewoodwhisperer's profile

Duane's Steamer Trunk #4: Duane's Steamer Trunk #4

04-10-2009 04:22 AM by thewoodwhisperer | 4 comments »

The final installment of the Steamer Trunk series. I apply the faux walnut straps, apply the water-based finish using my HVLP turbine, and install the tansu hardware. All in all, this was a great project that really reinforces simple frame and panel construction. At the end of the video, I even have a little update on Duane’s progress on his trunks. Things are coming along nicely. Best of luck to you Duane! And if you would like to donate to the cause, please check out the fo...

Read this entry »


View thewoodwhisperer's profile

Duane's Steamer Trunk #3: Duane's Steamer Trunk #3

03-28-2009 05:14 PM by thewoodwhisperer | 4 comments »

In this episode, I go over some pre-finishing tips and finish the inside of the trunk. I then go through the entire assembly and glueup process from start to finish. I then discuss the trunk’s lid, which is different from the original plan. You can download a Sketchup plan for the lid here. Once the lid is glued up, I realize that rushing through this project has resulted in a number of errors. So I fix them. I know how you guys love it when I make mistakes so you won’t be disa...

Read this entry »


View thewoodwhisperer's profile

Duane's Steamer Trunk #2: Duane's Steamer Trunk Pt. 2

03-20-2009 06:17 AM by thewoodwhisperer | 5 comments »

Moving right along, we continue cutting and assembling parts for the steamer trunk. I spend a good deal of time on techniques that will help you when working with plans. The key is to realize that some parts need to be cut using measurements from your project, NOT from the plan itself. I also spend some time creating the thicker top panels, since they are not as simple as they appear from the outside. Now that all the joinery is pretty much complete, I show you an alternative method ...

Read this entry »


View Ken Wright's profile

Begining the craft #1: Background

03-18-2009 04:03 AM by Ken Wright | 3 comments »

Hey folks. I decided I was going to get into the carpentry hobby. My background has been military, law enforcement, journeyman electrician and HVAC tech. This is new challenge so here we go. I just bought a Ridgid TS3350 tablesaw, Ridgid DP 15501 drill press and a Ridgid R29301 router combo w/benchdog extention table. I already have a vast collection of hand tools so I think I’m through until my project calls for another. I’m goin to just play with scrap wood that I have laying...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase