When I built the router table as an extension of my table saw I had in mind using it as more than a router station. For starters it allows me to make wider rips on my table saw, but it does a few more things and I’m not done yet. [Above and below] Like others of its brethren, my router station can be used with or without the fence. I have a vacuum port set in the fence as well as one for the cabinet depending on which one I think will work best. [Below] The router is mount...
I recently inherited my grandpa’s vintage 10” craftsman table saw. It had a broken fence and was on a wobbly metal cart that had been pieced together. I have no idea honestly if he ever ripped anything more than 3-4” on it because of the fence. Anyways, the saw runs great and I want to put it to good use. Some of the problems presenting me were: 1) Saw will be in a garage shared with other stuff2) The stand and fence needed to be replaced3) My young kids play in the garag...
Hello my fellow Lumber jocks. This is the first time posting and would like to share a tablesaw base I made. I have the dirst part of that video and I also made a second video of it. 3rd video will come soon and that would be where I will be able to utilize the whole tablesaw station more! Drawers for storage. Who doesn’t need more storage? Here is the making of the tablesaw base:https://www.youtube.com/watch?v=UHBKFXS800o&feature=youtube_gdata_player And here is the 2nd video...
Drill Press Station – Table/Lift/Fence/Vise/Drum Sander My drill press is a small inexpensive bench top type, and until I get a good floor type one I am trying to get the best out of it. One of the first things I did was to change its old pole with a stainless steel one. Why stainless steel? Well it was the only piece I could find that matched the diameter and you can slide up and down smoother. So the pole got a lift-up of about a foot taller. One of those ikea wire sh...
A few weeks have passed since i initially glued up the counter tops. Now it was time to start building the base and tying the cabinets together. My dad offered to come over for a day and help with anything i needed and i couldn’t say no to that! We planed and ripped all the boards to give it a new fresh edge and dress things up a little. First we attached a cleat to each side of the cabinet and used some lag bolts for a secure hold.We initially thought about using plywood to tether ...
The weekend of the 16th my dad and uncle came through as we all were heading up to the Twin Cities to hang out with my brother for weekend and take on a Timber wolves game. The timing was pretty much perfect and I had them help me glue up the 3/4” industrial grade particle board. The counter top on the left was glued up at 8’ and the right side was 4’ long, both 30.5” wide . I didn’t use any clamps, just screws about every foot along the sides and then down th...
In High School we had a nice long bench in the back with a radial arm saw and I remember how convenient it was to have it when making long board cross cuts and having a block stop on the fence for multiple perfect cuts. Ever since then I’ve wanted to have something like this in my shop. Currently My saw has been sitting on my great grand father’s custom made steel bench from his jointer and shaper. Then if I need to cut a long board i have to set up a roller support bar which i...
Ok, so it’s much more fun to dance than to fix…. Apparently welding a frame should not be undertaken without proper support, or ahh… more experience. The frame had a twist to it across the 59.5” length! I cleared a section of the shop floor (miracle) got out my door installation level and found a fairly level area. I then proceeded to use some shims to adjust the floor until the it was perfectly level. Gotta give credit to the guys that screeded the floor some 50 y...
Last year I bought a half kitchen with the idea that I would add the cabinets to my workshop and give it an upgraded feel. (Right now everything is gray melamine which I got from an office that was being torn down.) When my wife saw that I was going to use the cabinets in my shop she immediately said they are too nice to get beat up in the shop. Too nice is a relative term. Let’s take a look. Here is an example of one of the cabinets. Here it is from different angle. Th...
I bought a compressor last week; a PC 3 nailer combo pack. With the limited space I have in the shop, portability is a necessity. Wood magazine had a plan for a compressor station in a back issue that I had so I decided to build their model. I spent a few hours last night cutting the parts and prepping the carcass. This item is more carpentry than true woodworking. Joinery is simple butt joints but will hold up for what it is being used for. The base carcass will hold the compressor an...
- My Journey As A Scroll Saw Pattern Designer - 1563 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1588 entries
- frank - 417 entries
- degoose - 395 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 276 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 188 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 175 entries