The Stanley #45 Touted by Stanley as “7 Planes in One” Beading and Center-beading Plow Dado Rabbet and Filletster Match Plane (Tongue and Groove) Sash Plane Slitting Plane What shall follow in subsequent entries will be information that I’ve been able to gather on these wonderful planes. I won’t claim to be an expert on the subject matter, but rather someone with a profound interest in the uses of a Stanley #45. I will use this first entry to...
A little while back I ran accross a nearly complete #45 at a very good price so I snatched it. These are the as found pics. Astually in pretty good shape. After a bath in Evaporust. Then some further cleaning and waxing and polishing. Here she sets in all her glory with all her parts. And now to put her to work. She seems to work pretty well. Not as hard to set up as I thought it would be.
I picked up two boxes of cutters for a Stanley 45. I have a couple of planes that I had picked up but needed cutters. The guy had 4 planes. One looked pretty early so I decided to buy it as well. Question to the experts. Is this a Type 2? Box with 21 cutters. I think this is a base set 1910 to 1920 based on number of items? Sweetheart box with 12 cutters (all present)
This could start as a tool gloat, and really should be, but will eventually become a project. Because I can’t seem to write briefly, succinctly, or other synonyms for short, I’ll just go with it. I’ve mentioned before that my father was the one who inspired me to woodworking. It was something he did to either save money, to make money with restored antiques, or to repair things around the house with a bit of flair thrown in for good measure. Over the years he collect...
By Joshua Farnsworth (Writer at WoodAndShop.com) I shot the above Video at Roy Underhill’s Woodwright’s School (original blog post is here). Bill Anderson shows how to properly use a Stanley 45 Combination Plane to cut a simple groove for use in a dovetail box or many other uses. Bill shows the basic parts of the combination plane and how to adjust them. You’ll learn how to hold the Stanley 45 combination plane to get a consistent groove, and how to avoid misshaped grooves...
By Joshua Farnsworth (Writer at WoodAndShop.com) I shot the above detailed Video of master joiner Bill Anderson at Roy Underhill’s Woodwright’s School in Pittsboro, North Carolina. Bill shows how to cut a half-lap dovetail joint that covers the bottom groove in dovetail boxes. This excellent joint not only looks amazing, but it hides your grooves! BTW, he used mahogany wood on this joint. View the original blog post here. Yes, this video is longer than my typical videos, but i...
- My Journey As A Scroll Saw Pattern Designer - 1358 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- Just for Fun... - 84 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1381 entries
- frank - 417 entries
- degoose - 391 entries
- dbhost - 389 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 224 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 189 entries
- Rustic - 185 entries
- Chris Davis - 183 entries
- shipwright - 179 entries
- BritBoxmaker - 166 entries
- PurpLev - 163 entries
- stefang - 154 entries