A friend of mine has a cabinet shop with a spray booth and was nice enough to let me play in it. These photos were all taken in his shop. Here is one of the samples we tried on a test piece. This is aniline die dissolved in alcohol. WOW, I really like the color! We used his Festool sander for the final sanding. I had to stir the dye for over an hour. On goes the die: Sanding in between coats of sanding sealer and lacquer: Er...
Well, here it goes…the long story. On my last tour to Iraq I was stationed at Balad AB, the largest FOB (Forward Operating Base) in the AOR (Area of Responsibility). I was in charge of a 110 person security team known as the FPs (Force Protection). To make a long military story short (since this is a woodworking site, not a military site), my team was responsible for the security of the entire base both inside and outside the wire, and a lot of stuff happened that made us a very tigh...
I wanted to recreate this Jeff Jewitt finish from Fine Woodworking #157, however the article didn’t list which formula was used. I consulted with Jeff, and it was Transtint Brown Mohogany dye, followed by McCloskeys Walnut stain. McClosky no longer makes stain, but sold to Valspar / Cabot. ---So I set out to make a sample board to achieve the rich, dark color I was after. ---The top colors are stain only, the middle colors are dye first then stain, and the bottom color is dye only. ...
Let’s get it startedWe finally became permanent tenured teachers last year and decided it was time to get more done on the house. My friend Juan had found a great carpenter also named Juan who does it all… paint stripping, rough and finish carpentry, paint and stain. We took the plunge. These guys are reliable. They show up on time and even work Saturdays. They never say no. To start we planned to have them strip the living room, fix the plaster, paint, and restain, and f...
Hi guys, So in an effort to gear up my lab stuff, I recently bought a cheap peristaltic pump on ebay to help extract xylindein faster. Relying on gravity sure works, but it’s damn slow. So I filled up a funnel with xylindein-stained sawdust, connected the output to the pump, set the other end of the pump above the funnel for a closed-loop circuit of sorts, dropped enough acetone to soak all the sawdust, and fired the pump for a few minutes. Wow, I gotta tell you, this modus operandi ...
2 days left and I got a finish coat of stain on tonight, after my wife got home from work and helped me get a burl. The city dumps trees and compost and dirt about a quarter mile behind my house and my cousin is on the DPW. So I have free access to all the fallen trees in the city. The other day I was back there with the quad checking out my lumber and noticed a big old maple burl I could’nt pass up. So I started working on it with my chain saw. I never finished it through the holidays ...
I know dark colors are a bad idea in a dusty shop, but I just couldn’t resist their siren song. Time to go crash my boat on the rocks! I looked at the colors of the planer, and with the help of our office manager at my company, decided I wanted a black cabinet with a red drawer. I labored over my choices for an hour in Home Depot, and even had them unpack stock boxes to get some Minwax ‘blank’ stain so we could mix up some reds. I chose “Spice” and “Chin...
Here is how I finished the bookshelf in our now demolished spray booth.Hope you get a few pointers/tips from this and perhaps you have some advice for me.
So here it is: the first attempt at determining the temperature at which the pigment produced by Chlorociboria vanishes. This is preliminary data (you never stress it enough!), furthermore testing will be needed to assess the exact way it happens within a seriously controlled setup. The pigment is stable up to 90°C, then it quickly starts to degrade. At around 110°C, half the pigment has lost its color. At 125°C, only 25% of the coloring remains. At 155°C, only 10% of the green is s...
Ok, so I know that finishing is an art all in itself. Finishing takes a lot of time and patience for beginners, but it seems that once you get it, you got it! I am struggling pretty badly with a Cherry Top entryway table that I am making my wife. The table started one Saturday as a ‘nothing special’ just needing a place to put a lamp type of project. My wife bought some curvy legs (the type with balls at the bottom of the feet) at Lowes one day because they were on clearanc...
- My Journey As A Scroll Saw Pattern Designer - 1263 parts
- Extremely Average - 324 parts
- Workshop Development - 95 parts
- A journey into the workshop. - 88 parts
- Daily Update - 87 parts
- Just for Fun... - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 75 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1285 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 369 entries
- Ecocandle - 325 entries
- MsDebbieP - 311 entries
- Karson - 301 entries
- Martin Sojka - 297 entries
- William - 257 entries
- Betsy - 221 entries
- mafe - 216 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Rustic - 184 entries
- Chris Davis - 183 entries
- shipwright - 168 entries
- PurpLev - 163 entries
- BritBoxmaker - 160 entries
- stefang - 148 entries