Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....
This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...
Intro: Hello to all and welcome to the first installment of Intarsia Basics. Before we can start cutting we need to select the wood we want to use and get our pattern ready. Wood Choices: I prefer to start with stock that is one inch thick because that gives you a lot of depth that you can work with. It will require a little more sanding on some areas but it will help to give your piece a 3D look. It is your choice if you prefer to stain your wood to achieve the colors or use exot...
Thanks for joining us for the third installment of “Intarsia Basics” and this is where it starts to get really fun. Cutting out the pattern is one of the best parts of doing this kind of art. It takes a little practice to get used to using your saw. You can look up some practice patterns or just make some zig zags, loop the loops, straight lines, gentle curves, and circles on a piece of paper and glue to a practice board. Cut out some of these and you will start getting used to the “feel ...
Hey LJ! So a few weeks back I posted some mid-project photoes of how my bandsaw build was going and although it is not entirley finished and still needs little extras like a coat of paint, a stand and a fence I can now show you the fully working and (built bandsaw). Heres a quick video showing the build process… Enjoy! Its been a great project and I hope to soon post another video showing it in all of it glory.
Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
In this episode I go over the installation of the drawer slides. It is very important to remember that the width of you drawer box is the key to a successful slide installation.
I just wanted to update on the status of the class and inform every one of the delay. For those of you that do not know, I had a misfortunate (stupid?) accident and broke a bone in my right hand a couple of weeks ago. I was hoping that I had progressed far enough beforehand that it would not affect the class. Unfortunately the bones are not healing correctly and it is taking longer for ir it to heal. I tried again tonight, but do not have enough dexterity or hand strength to sand while I...
Since I’ve been documenting everything about my experience with the Fuji Mini-Mite 4 I decided to collect all the info in a blog series. So here we go! Backstory (skip past this if you just want to read my impressions of the fuji):For about a year I used a Qualspray QS-125WB from homestead finishing with my makita twin stack compressor. I also opted for the bigger 20 oz cup since it was to be my main spray setup. In that year I used the gun a lot, and it worked great, but the comp...
With so many types of slides out there, there are different ways in which to install them. So here is another type of slide installation. I hope this is informative for everyone.
- My Journey As A Creative Designer - Woodworking and Beyond - 1807 parts
- Extremely Average - 324 parts
- Toy costruction - 128 parts
- A journey into the workshop. - 112 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 90 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1832 entries
- dbhost - 439 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 320 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 245 entries
- Dave Rutan - 245 entries
- Betsy - 228 entries
- stefang - 221 entries
- A Slice of Wood Workshop - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- bandit571 - 201 entries