With so many types of slides out there, there are different ways in which to install them. So here is another type of slide installation. I hope this is informative for everyone.
In this episode I go over the installation of the drawer slides. It is very important to remember that the width of you drawer box is the key to a successful slide installation.
As we continue on in our build we get to where we need to build the boxes for our drawers. I run through it and explain about setting up for the drawer slides.
So here is part two of this series on making these desks. I show you how I layout my sheet goods and yes I did solve my quandary of the pencil drawer grain. So I hope that this is entertaining and educational for all.
I know this is a little out of order but I needed to get started on these desks ahead of the garbage can containers. What is great about these desks is that we will be using different kinds of joinery. We’ll be laminating the legs, pocket hole joinery for the aprons and top. Plus there will be some edge banding happening too. You will also see how I build my drawer boxes and the material that I use for this in future episodes. Don’t forget to sign up for Huck’s (hucksdi...
We are working on a entry bench and mirror set for a homeowner. There is a small space in the entry of the condo by the base of the stairs that will accommodate a sitting bench and decorative mirror. The mirror unit will be made up of poplar and will have a dark finish. An existing mirror from the powder room has been fabricated and will be framed. a shelf and crown trim will be at the base and crown and a shelf will finish out the top. The bench seat will have a flip lid to store thi...
Well, disappointingly, the desk top needed a complete re-sanding. In the higher temperature conditions late yesterday afternoon the finish did not flow well and left an unacceptable orange peal surface. The orange peel was just too rough, another coat wouldn’t help. the other parts were quickly brought to smooth with a 220 grit rubdown. I sealed the desktop’s new surface with shellac, which dried very quickly; warm today. Knocked down the nibs, and shot a coat of thinned poly....
My brother and I have spent a good deal of time lately building a blanket chest our of quarter-sawn white oak. We have the inside lined with aromatic cedar (not fully installed yet, till after we put the finish on the rest of the project). I thought that I wanted to spray on the stain and the topcoat (was planning on polyurathane). I bought a turbine HVLP sprayer, the one from Rockler, which I wanted to get eventually anyway, b/c I keep reading/hearing that it puts a better finish on. I hav...
Hey everyone, I am booking wood turning and wood working clubs to come and sell my burl wood. If you are interested in scheduleing reply of call me. I will be headed to Southern California 2nd week in August August 15th I will be introducing myself to the Wood turners club in Grants Pass, Oregon. Would love to schedule something north in Portland and up to Washington. I would evern consider going east coast if it was a large enough group. I am game for almost any place in the USA. I ha...
OK we are out of the clamps with our project and we level the legs. Next we do a little more finish sanding and spray our finish. *Note one thing I forgot on the video I buy adhesive backed felt and put on the bottom of the feet to ad that “Pro” touch to it. Enjoy and if any would not mind doing me favor, how about leaving some reviews on iTunes for me. Thanks In Advance, Huck
- My Journey As A Creative Designer - Woodworking and Beyond - 1828 parts
- Extremely Average - 324 parts
- Toy costruction - 131 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Shop stuff - 85 parts
- Life as an Amateur Woodworker - 82 parts
- Sheila Landry (scrollgirl) - 1853 entries
- dbhost - 452 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 275 entries
- robscastle - 263 entries
- William - 258 entries
- shipwright - 258 entries
- A Slice of Wood Workshop - 233 entries
- bandit571 - 229 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries