LumberJocks

Woodworking blog entries tagged with 'spray gun'

  • Advertise with us
View Tim & Candy Hicks's profile

Sweeping Juniper Coffee Table #1: Getting the plan

08-06-2008 02:28 AM by Tim & Candy Hicks | 4 comments »

We have had many requests for coffee tables, so we are making them as fast as we can. We plan on making 2 more coffee tables and I think the next two will have glass tops, anyway here is the project that I am working on. This table has a “sweeping” movement to it. I had a request to make on that was similar to a coffee table table I posted on here. Well this is as close as I can get. We will also have to add a couple of legs so that it will stand without sitting on a base ...

Read this entry »


View Tim & Candy Hicks's profile

Juniper Log Table with Stone Inlay Burled Cottonwood Top #3: Ready to sand the first stage of stone inlay

08-06-2008 02:13 AM by Tim & Candy Hicks | 5 comments »

Here is how the table looks right now. Everything is bolted together, the branch pedestal, cottonwood base and cottonwood top have been bolted together. My husband has finished the first step in setting the stone inlay, we now need to sand down the stone so that is is smooth, then add a finer stone to fill in the gaps.

Read this entry »


View Tim & Candy Hicks's profile

Juniper Log Table with Stone Inlay Burled Cottonwood Top #2: Workong on stone inlay in the burled top

08-06-2008 02:09 AM by Tim & Candy Hicks | 2 comments »

We finished the base and the pedestal, they have both been sprayed with the finish and now the top has been bolted on to the base. So now we are inalying the malachite Tim is using the dremmel tool and cleaning up and soft spots and natural cracks so we can add the stone All the inlay has been set and is now drying When it is all dry we will sand it down and fill in the gaps with a finer crushed stone, sand again and then spray the top

Read this entry »


View Tim & Candy Hicks's profile

Juniper Log Table with Stone Inlay Burled Cottonwood Top #1: Putting together a new table idea

08-06-2008 01:47 AM by Tim & Candy Hicks | 1 comment »

Here is a coffee table that we are currently working on, this is one of those juniper pieces that we have had laying around forever and it has finally manifested into a neat little coffee table. It will stand aroun 19” tall This table will have a burled cottonwood top and the juniper branch base will be sitting on a cottonwood base as well. This top is almost kidney/bean shaped and has 4 hearts, this will have malachite stone inlay. Sanding off the gold color an...

Read this entry »


View teenagewoodworker's profile

Commisions #8: pull out trash box #3

08-02-2008 05:09 AM by teenagewoodworker | 10 comments »

well i had some really good shop time today and got alot done. a lot of pictures so i will try to keep text to a minimum. as always first i started off cutting the board to manageable pieces. then milled them 1/8” heavy and let them do their moving and took them down to final size when i needed them. then i needed to glue up the panel for the top and here i am doing a dry glue up to get everything ready. after the glue up was done and the glue dried i took the panel out. flus...

Read this entry »


View teenagewoodworker's profile

Shop Tour #2

08-01-2008 05:22 AM by teenagewoodworker | 24 comments »

Well, its been awhile now so i figured that it was time for another shop tour. i have made a lot of shop additions in the past few months and i have gone from just a kid with a few tools to this now having a fully funtional shop and being able to sell my work and taking in commissions. so here is my updated shop tour watch out it gets a little crazy at the end, but i left it in for giggles :) so i hope that everyone liked it. i’m really not sure what the next videos i am going t...

Read this entry »


View Karson's profile (online now)

A LumberJock offered to me a most wonderful gift. Some time in his shop.

07-31-2008 01:09 AM by Karson | 16 comments »

No it was not an offer of free wood. A posting on one of my blogs last night was a offer of most immense proportions. The offer was to allow me to use his shop and his time to work on a project for my wife. Here was his offer I immediately responded yes. The LumberJock was none other than our respected Lee Jesberger I mean here was a LumberJock that built 36 kitchens for one customer. Here was a LumberJock that built a $100,000 kitchen for another customer. He was allowing me to be h...

Read this entry »


View Jim13's profile

Before you buy any tool read this: A lesson; purchasing tools

05-25-2008 10:57 PM by Jim13 | 8 comments »

!!!!!!!!!!!!!!!!!!!!!!!!!!!!DISCLAIMER: This article is based on personal experience and preference. I am not responsible for absolutely any personal damage, monetary loss or any “bad happenings” that came/come about through the outcome of this article. By reading this article you 100% agree to the terms of the previous statements. Again I am 100% NOT responsible for any bad mishaps that come about!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thank you Almost all woodworkers ...

Read this entry »


View Jimthecarver's profile

My first chest of drawers (small)

04-04-2008 04:37 AM by Jimthecarver | 11 comments »

I built this small chest of drawers from scrap wood that was just laying around the shop. It started with a phone call from my Dad. He had explained that he needed a small chest with 3 drawers to fit between the beds in his fifth wheel trailor. The measurements of 14.5” X 18” X 27” was a tight fit so I decided to use the space wisely and not have an overhang on the top. I decided to use the Herring bone pattern on the top to use up a few small scrap pieces of Oak and Maple,(...

Read this entry »


View Tim & Candy Hicks's profile

My first blog!!

03-30-2008 04:12 AM by Tim & Candy Hicks | 8 comments »

Hello to all our fellow wood workers out there, and great job for doing what you love. Even though there are times that we get frustrated with a project that we are working on, run into on problem after the other; like finding new scratches everytime you change the angle of your light, whoops dropped it again, dang I forgot to do that or where did that run come from? We stick with it because it is a part of us, we love it and with every item that we make, we leave a little piece of ourselves ...

Read this entry »


« prev 1 ... 12 13 14 15
150 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com