LumberJocks

Woodworking blog entries tagged with 'spray gun'

  • Advertise with us
View Tim & Candy Hicks's profile

Burled Juniper Log Floor Lamp #3: Turquoise in the base

1920 days ago by Tim & Candy Hicks | 0 comments »

The turquoise being inlayed in the base

Read this entry »


View Tim & Candy Hicks's profile

Juniper Log Furniture : Floor Lamp #6: Wicked Lamp is finished

1920 days ago by Tim & Candy Hicks | 11 comments »

This lamp is just the coolest. The then ribbon movement and sweeping motion is phenomenal. 71” tall to the top of the shade The base is 39” x 24” It weighs 70 lbs As you can see we added turquoise throughout.

Read this entry »


View Gene47's profile

Murphy Bed #12: Spray Gun Practice

1949 days ago by Gene47 | 2 comments »

Well today I went out and bought myself a good respirator to use when spraying paint and lacquer. Then after getting back home I went out and put some mineral spirits in my new spray gun and set up a large piece of cardboard and went to adjusting and practicing. I think I have the air adjustments very close to what needs to be when I actually start spraying the lacquer. I will just have to spend a few minutes adjusting the material flow once I get real lacquer in the gun. I also fiddle...

Read this entry »


View Gene47's profile

Murphy Bed #6: Face Frame Assembly

1958 days ago by Gene47 | 2 comments »

Thursday I spent most of the morning researching for a spray gun then did some sanding and got what I have done so far ready to assemble. Friday I got some small things finished up getting ready to make the final push to complete the outer case for the bed. Before going out to the shop I confirmed my order for a new HVLP spray gun and it should be here by the first of the week. I then attached the frame structure to the face panels using construction adhesive and screws. Then ...

Read this entry »


View Tim & Candy Hicks's profile

Burled Cottonwood Log Furniture Dining Table #6: Completed!!

2020 days ago by Tim & Candy Hicks | 7 comments »

Here it is!!

Read this entry »


View Tim & Candy Hicks's profile

Burled Cottonwood Log Furniture Dining Table #5: Delivery and Setup

2020 days ago by Tim & Candy Hicks | 2 comments »

Here it is delivered to house. It takes two people to carry each stump and six men to carry the top up the stairs and into the house. I sure am glad I was the one taking the pictures. The measurements on this table are 81 1/2” x 44” and 31 1/2” tall.

Read this entry »


View Tim & Candy Hicks's profile

Burled Cottonwood Log Furniture Dining Table #4: Sprayed

2020 days ago by Tim & Candy Hicks | 3 comments »

Well, here it is sprayed and ready to take out for delivery. We finished with Satin Polycrylic

Read this entry »


View Tim & Candy Hicks's profile

Burled Cottonwood Log Furniture Dining Table #1: Rough Material, ready to begin

2020 days ago by Tim & Candy Hicks | 2 comments »

The guy that purchased this table has a 600 lb granite top. So we had to make something large, sturdy and yet attractive. The cottonwood came from the K Ranch on the Colorado Utah border in Dinosaur Colorado. And yes it is seriously the name of a town. Here is the rough material. each stumo will sit on a base, the base it not necessary, it adds to the beauty

Read this entry »


View Scott Parsons's profile

Finishing #3: Spray Guns and Fans

2023 days ago by Scott Parsons | 3 comments »

Well, I was considering what to put down in digital ink next and decided on a few different things. I wanted to talk about the guns that I use first.I have six guns in use at any given time. Sometimes I have multiple projects all with unique colours. I have one good quality gun. It’s a Devilbiss with a 1 litre cup. I also have a Lemmer and the other four are low quality Husky brand from Home Depot. All my guns are gravity fed and have 1/2 liter cup except for the Devilbiss.I&#...

Read this entry »


View Tim & Candy Hicks's profile

Twisted Coffee Table Base #3: Juniper Table Base Leveled & Shaped

2025 days ago by Tim & Candy Hicks | 4 comments »

Well, we are making some progress on the two coffee tables that we are working on. This is after it has been leveled, the levelers/slides have been added and all the rough edges have been rounded and shaped. Today my husband is sandblasting then tomorrow we should start the final and longest phase… sanding and polishing This is the part that we cringe and hope we stay in line… dont want to end up with an extra short coffee table Whew… right on line and ready to f...

Read this entry »


« prev 1 ... 8 9 10 11 12 13 14 next »
135 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase