LumberJocks

Woodworking blog entries tagged with 'spray gun'

  • Advertise with us
View Bob Rodrigues's profile

Dust Collection??

02-02-2016 01:14 PM by Bob Rodrigues | 10 comments »

I’m in the market now for a dust collector. Being married with 2 kids there really isn’t a lot of money I can budget for this at this time. I’ve read the reviews on the Harbor Freight dust collector but I’m wondering If I could get some woodworkers perspective that have this unit. How is it? Does it work well? And is it ok to run pvc or gutter sewerage pipe instead of the metal stove type of piping???? Any info on this topic from all LJ’s would be great.

Read this entry »


View ttocsmi's profile

Double Single Bed #5: Bed Bolts & Final Assembly

01-25-2016 02:55 PM by ttocsmi | 0 comments »

With the dry-fit of the headboards complete, it was time to drill holes for the bed bolts. (Sorry, no pictures. I’m sure you can imagine what holes look like.) The 3/8 inch holes through the posts were done earlier on the drill press (see part #3). Two were off-center by about 1/16 inch, but the rest were spot-on. To bore into the rails, I set up the mini-jig below for each joint. The rail is held in place using some scrap 4×4 and clamps. The shoulders are flush with t...

Read this entry »


View Marv's profile

Are you kidding me

08-17-2015 09:41 PM by Marv | 18 comments »

The low lifes have even invaded here? 145 posts in 5 hrs. Attention administrators, not the kind of wood we come here for. this is what I got. Hi,i really like your profile and i feel it would be nice to get to know you more better,here is mine email address (edddorasy@outlook.com) I have something very important to discuss with you privately and i don’t want to discuss it here. hope to hear from you soon. Mrs Dorathy Edward, —ddratw

Read this entry »


View wdwrkr631's profile

Weekly Shop Update #6: Shop Update Week Of 9 August 2015

08-10-2015 11:51 PM by wdwrkr631 | 1 comment »

Hello everyone, Check out this weeks shop update to see whats been happening in our shop. We discuss the tool cabinet and future project ideas. Here is a link to the video. https://www.youtube.com/watch?v=UdkqV23PG6w

Read this entry »


View JenTWG's profile

1950s Cass Toy Co Chest Restoration #1: Research and Documentation

03-01-2015 10:23 PM by JenTWG | 3 comments »

This chest is my father’s and he asked if I would restore it for him and fix most of the damage. I first started by researching the chest. I knew by stripping the chest I would most likely loose the images either with a chemical stripper to replace/repair the finish or by sanding. I wanted to see if the manufacturer still existed and could be contacted for information or help during this process. Turns out Cass Toy Company is no longer in business and was destroyed in a fire i...

Read this entry »


View DocK16's profile

HVLP Advice

02-09-2015 01:51 AM by DocK16 | 3 comments »

I picked up a Fuji HVLP sprayer a couple years ago at an auction thinking I would need it someday; well that day has come, I need to spray 35 kitchen doors and drawers and I must profess my ignorance on where to start. I want to spray varnish (not water base) with it but I have a few questions. Can you spray polyurethane with an HVLP gun? If yes how much does it have to be thinned and what kind/size spray tip do you need. Any knowledgeable advice would be greatly appreciated.

Read this entry »


View GCM's profile

A non-plywood 4 drawer filing cabinet #2: A half scale prototype

01-15-2015 08:25 AM by GCM | 0 comments »

This is my half size prototype made entirely out of pallet wood (besides hardware).Finish is home made chalk paint with a wax finish (shabby chic) – the finish doesn’t photo very well but I am very happy with it, it came out the best I have been able to achieve so far. This size is perfect for DVDs etc. (I did a more thorough write up but the text disappear after I uploaded the pictures for some reason).

Read this entry »


View Nate66's profile

Work Shop Organization #1: Power Tool Storage

01-01-2015 02:15 PM by Nate66 | 1 comment »

In trying to keep my workshop organized and clutter free so I can work at my bench without having to search for tools, I found a definite need for somewhere to keep my power tools besides in their original boxes. Their original boxes keeps them organized, however, it makes them less accessible and frankly a pain in the rear to unpack and repack the tool each time it is used. Also the original boxes take up a lot of storage space when you have a confined space to work in to start with. ...

Read this entry »


View prestigedesigns's profile

Who Designs blind? Buyers FAQs.!!! Prestige Design

09-16-2014 07:29 PM by prestigedesigns | 2 comments »

Prestige design: CHECK OUT OUR FACEBOOK AND SHOW SOME Support… www.facebook.com/prestigedesign I always get a question before someone puts an order in “Can you really design what is in my mind?” My answer is YES. Then i prove it….I ask them key questions to help me understand what they want. Am i always right….NObut if i am not correct on what they want, they change their mind to the design i made The next question before i build it “how did ...

Read this entry »


View ajw1978's profile

Entering the home stretch....

08-29-2014 08:18 AM by ajw1978 | 2 comments »

Don’t want to jinx it by gloating too much, but coming into the end of my most satisfying accomplishment yet. Building a trophy/plaque/award in honor of a lost friend. A last minute thing that had to be ready to go Sunday morning. Tapped the bullpen and called in the old man, who introduced me to Rockler where I found two pieces of walnut crotch that I said would “make do.” Sanded. Stained. Somehow, put a perfect edge on the base with the router; didn’t screw up the...

Read this entry »


1 2 3 4 ... 15 next »
144 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com