LumberJocks

Woodworking blog entries tagged with 'spray gun'

  • Advertise with us
View Ryan Brown's profile

Home Depot Power Tool Sale!

09-03-2009 11:45 PM by Ryan Brown | 8 comments »

Great deal at Home Depot! If you are thinking of getting something like the DeWalt DW735 13” planer or any other expensive power tools, now is the time! All power tool accessories are also included! http://www.homedepot.com/webapp/wcs/stores/servlet/ContentView?pn=PM_TH_Ultimate_Power_Deal&langId=-1&storeId=10051&catalogId=10053

Read this entry »


View OregonBurls's profile

How to find great figure wood other than Burl

10-24-2009 05:33 PM by OregonBurls | 8 comments »

This is in addition to the burl blog I put on a week ago. Thank you for all the reads.This is to the best of my knowledge and I am still learning.I have found crazy figure in tree crotches. A tree crotch is where two branches come together. It is usually the piece that fire wood people don’t want because it doesn’t slit. That is because the crotch is the hardest part of the tree and the grain in going in different directions. It’s where you get what is called “feather”. “Haring bone, r...

Read this entry »


View BigBrownLog's profile

The art of building Wooden boats

03-16-2016 03:14 AM by BigBrownLog | 8 comments »

I’m just getting this blog post started so it already set up, but in the next 6 months I should have everything up and running for me to build wooden boats for people. I’ll be starting out with some strip built kayaks and canoes most likely. In all actuality I have no idea what people are going to want. I plan on just getting the word out and let people come to me so we can sit down and draw up exactly what they want. After I’ve got a good thing going I will start cold moldi...

Read this entry »


View teenagewoodworker's profile

Commisions #11: pull out trash box #6 done (sort of)

08-26-2008 04:28 AM by teenagewoodworker | 8 comments »

well here is the final post in my pull out trash box thing series. figure i’ll get right into it. first i started by adding some 45 blocks to the place where the trash can sits. i had to notch it because that drilling would have been pretty hard without a drill press. i notched it a bit to much though. and i used brass screws. why? because they were the only ones that were short enough to not go through my surface. but to sound smart just in-case someone missed the bucket its good th...

Read this entry »


View Jim13's profile

Before you buy any tool read this: A lesson; purchasing tools

05-25-2008 10:57 PM by Jim13 | 8 comments »

!!!!!!!!!!!!!!!!!!!!!!!!!!!!DISCLAIMER: This article is based on personal experience and preference. I am not responsible for absolutely any personal damage, monetary loss or any “bad happenings” that came/come about through the outcome of this article. By reading this article you 100% agree to the terms of the previous statements. Again I am 100% NOT responsible for any bad mishaps that come about!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thank you Almost all woodworkers ...

Read this entry »


View Scott Parsons's profile

Finishing #1: The Big Mean World of Finishing

02-03-2009 05:59 AM by Scott Parsons | 8 comments »

I’ve been thinking about what I do for a living and how I came to the level of finishing that I’m at. I’m what I would call a Modernist Finisher. I use whatever I can to make my job more efficient, cheaper and pursue better quality. A lot of people will say that these three things don’t go well with each other and I guess that’s true for some things in life. What else is true in life is balance and with proper balance the finishing process can be all of these...

Read this entry »


View Tim & Candy Hicks's profile

My first blog!!

03-30-2008 04:12 AM by Tim & Candy Hicks | 8 comments »

Hello to all our fellow wood workers out there, and great job for doing what you love. Even though there are times that we get frustrated with a project that we are working on, run into on problem after the other; like finding new scratches everytime you change the angle of your light, whoops dropped it again, dang I forgot to do that or where did that run come from? We stick with it because it is a part of us, we love it and with every item that we make, we leave a little piece of ourselves ...

Read this entry »


View WoodJediNTraining's profile

Woodworking Contest - Whirligig Wars Winners

07-26-2012 08:41 PM by WoodJediNTraining | 8 comments »

All in all it was a great event with a lot of great entries. I would like to thank all those who participated in the 1st Annual Whirligig Wars Contest. When I presented the idea of holding a whirligig contest to Steve Ramsey (Woodworking For Mere Mortals) he and I agreed it would be a fun summer event. The response was overwhelming with over 6000 video views of the videos relating to the contest and many great comments from woodworkers all over. So it was decided early on that this would be ...

Read this entry »


View shipwright's profile

A Little Cabinetree #1: The Concept, the Goals and the Challenges.

11-21-2010 02:48 AM by shipwright | 8 comments »

When it comes to building boats, I guess after 30 years of it I am a professional, but as a hobby woodworker I’m pretty new. Boatbuilding has given me lots of skills and abilities with tools but the scale of projects and the individual manual skills required to make small cabinets and art furniture are totally different. I am a real beginner at this stuff and am having a ball trying to learn everything at once. I retired five and a half years ago, following which my wife and I rebuilt o...

Read this entry »


View OregonBurls's profile

Booking Wood Turner Clubs!

07-19-2010 10:40 PM by OregonBurls | 7 comments »

Hey everyone, I am booking wood turning and wood working clubs to come and sell my burl wood. If you are interested in scheduleing reply of call me. I will be headed to Southern California 2nd week in August August 15th I will be introducing myself to the Wood turners club in Grants Pass, Oregon. Would love to schedule something north in Portland and up to Washington. I would evern consider going east coast if it was a large enough group. I am game for almost any place in the USA. I ha...

Read this entry »


« prev 1 2 3 4 5 6 7 ... 15 next »
145 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com