Thanks for joining in again and I apologize for the delay. Hand is doing a lot better and it feels great to be back in the shop. Thanks for your patience and your encouragement to get better. In this section we will focus on shaping and sanding our pieces. In my opinion, this is the most important part of the process. Depth is what makes a piece really stand out and the more depth you use in your project the better you’re going to like the end result. We have all seen intarsia pieces...
This lamp is just the coolest. The then ribbon movement and sweeping motion is phenomenal. 71” tall to the top of the shade The base is 39” x 24” It weighs 70 lbs As you can see we added turquoise throughout.
well i had some really good shop time today and got alot done. a lot of pictures so i will try to keep text to a minimum. as always first i started off cutting the board to manageable pieces. then milled them 1/8” heavy and let them do their moving and took them down to final size when i needed them. then i needed to glue up the panel for the top and here i am doing a dry glue up to get everything ready. after the glue up was done and the glue dried i took the panel out. flus...
I just wanted to update on the status of the class and inform every one of the delay. For those of you that do not know, I had a misfortunate (stupid?) accident and broke a bone in my right hand a couple of weeks ago. I was hoping that I had progressed far enough beforehand that it would not affect the class. Unfortunately the bones are not healing correctly and it is taking longer for ir it to heal. I tried again tonight, but do not have enough dexterity or hand strength to sand while I...
Thanks for joining us for the third installment of “Intarsia Basics” and this is where it starts to get really fun. Cutting out the pattern is one of the best parts of doing this kind of art. It takes a little practice to get used to using your saw. You can look up some practice patterns or just make some zig zags, loop the loops, straight lines, gentle curves, and circles on a piece of paper and glue to a practice board. Cut out some of these and you will start getting used to the “feel ...
Can anyone give me advice on spraying on stain.Every project I ever built was always hand stained. Now i hear/read more and more about spaying stain on. It seems to have its advantages, even coat, and less time consuming. From what i read, I would spray a stain on then rub off the excess. Can someone share their ideas or tips with me? I have a small (1/2 quart) spray gun and compressor- used for auto paint. Can i use that? If so- is HIGH pressure OK to spray stain? OR do i have to go ...
This coffee table base was finished 2 months ago and we were able to get it shipped to The Netherlands. Out customer was going to put a rock fossil top on this, but had decided that it was so cool and unique that he ended up putting glass on it. It is 17” tall, finished with 3 coats stain polycrylic.
Just cut into these Saturday 25th!Just beautiful!!!
Great deal at Home Depot! If you are thinking of getting something like the DeWalt DW735 13” planer or any other expensive power tools, now is the time! All power tool accessories are also included! http://www.homedepot.com/webapp/wcs/stores/servlet/ContentView?pn=PM_TH_Ultimate_Power_Deal&langId=-1&storeId=10051&catalogId=10053
This is in addition to the burl blog I put on a week ago. Thank you for all the reads.This is to the best of my knowledge and I am still learning.I have found crazy figure in tree crotches. A tree crotch is where two branches come together. It is usually the piece that fire wood people don’t want because it doesn’t slit. That is because the crotch is the hardest part of the tree and the grain in going in different directions. It’s where you get what is called “feather”. “Haring bone, r...
- My Journey As A Scroll Saw Pattern Designer - 1545 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 95 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1570 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 271 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 170 entries