Well it’s been a couple weeks and the bitter cold snap has slowed the progress a bit.. but here’s the progress since we last met. I wrapped up the Toddler Rail joinery… voila! And surface prepped the walnut for finishing with some P220 on an ROS and P320 by hand. I was originally planning on just using my #4 and skipping the sanding (as much as possible) but I chickened out… I brought all the dowels home from Dad’s shop to my cozy (and down right CO...
A while ago I ask you to come up with new ideas for me to use my talent. One of you said to try nature, tree’s animals, then someone said Turkeys, OK I spent two days looking for the right picture. Then three days to come the stage I am now, I will try and go through each stage. and show how I come up t it. Stage one, looking for the right picture; Stage two was putting the pattern onto wood; and the third stage is doing the burning itself. I found a process which is, o...
Here’s one of a gentleman that wanted one of his youth to give to his Mother. He has a lot of feeling for her.
I should start showing the beginning picture of my burnings so you can see what I work off of. OK I made a mistake, I did not take a picture before I started this burning so I hope you will be able to see the before and after. Here is a couple that has asked me to burn this as a special momenta. Trying to get the right picture done as a pattern isn’t that easy and sometimes it turns out the first few times. this one took about six time of reprinting. I do go through a lot of in...
i have a new blog post about my dining chair project, check it out on my website. http://joshhallfurniture.weebly.com/1/post/2013/06/opus-magnum-dining-chair-project-is-finished.html
After a few weeks away due to travel and rainy weather, I was finally able to finish the table. The formula I was following was similar to what I used on an earlier folding step stool water based Transtint dye, sprayed shellac, and then as this was a table, Arm-R-Seal oil & urethane topcoat. I started with the dye, first wetting everything to raise grain, and then light sanding with 220 to knock down the stander uppers. I then mixed the Transtint Mission Brown dye power with distiller...
I recently worked on a customers Walnut entry way here in Denver. The door was previously finished with a water based stain and varnish. He already had it refinished 3 times in the last 5 years by the same person who finished it in the first place and got tired of refinishing it almost yearly. It’s no wonder that he had to refinish his wooden door so often if you use water based products outdoors. In my opinion these are made for interior use only. I used a high quality marine spar varn...
So when I last posted, I was having trouble with getting the #3 and #4 needles to fit without quite a bit of adjustment to the packing nut on the gun. Since then I’ve tried the following: new #3 needle sets from amazon and fuji, a new #4 set and a new xpc spray gun from fuji. I’m sad to say that nothing worked and the issue persists. Realistically, it probably won’t be a real world issue as everything I spray works perfectly with the #3 needle. But I just feel there should b...
Here is the latest blog post for my St Giles project. there is a photo included. http://joshhallfurniture.weebly.com/1/post/2013/03/st-giles-statement-piece.html Thanks Josh
Since I’ve been documenting everything about my experience with the Fuji Mini-Mite 4 I decided to collect all the info in a blog series. So here we go! Backstory (skip past this if you just want to read my impressions of the fuji):For about a year I used a Qualspray QS-125WB from homestead finishing with my makita twin stack compressor. I also opted for the bigger 20 oz cup since it was to be my main spray setup. In that year I used the gun a lot, and it worked great, but the comp...
- My Journey As A Scroll Saw Pattern Designer - 1261 parts
- Extremely Average - 324 parts
- Workshop Development - 94 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- As The Lathe Turns - 73 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1283 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 367 entries
- Ecocandle - 325 entries
- MsDebbieP - 311 entries
- Karson - 301 entries
- Martin Sojka - 297 entries
- William - 255 entries
- Betsy - 221 entries
- mafe - 216 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- shipwright - 168 entries
- PurpLev - 163 entries
- BritBoxmaker - 159 entries
- stefang - 148 entries