574 days ago
by BritBoxmaker |
16 comments »
You ain’t ever gonna keep me down. Lyric spotters please feel free to comment.
I left you, last night, as I was hacking at the pattern board with a chisel. No, I’m not mad. I’ve done all the tests.
It worked. I repaired the pattern.
I re-placed the mask and all looks good.
Re-taped the pattern
I scored a knife line into the pattern,along the outside edge of the outer tape. In combination with a strip of Polycarbonate, which has a line scored on...
Read this entry »
575 days ago
by BritBoxmaker |
15 comments »
I’ve decided to make this one with wood from from my scrap bin
and my ‘Ebony Bits Box’
-
I won’t bore you with the details but after a lot of cutting and sticking, using Viscose CA, I had made the pattern (with a few little modifications). This was glued onto a backing of 1.5mm Birch Aeroply, using PVA, and thickness sanded to 5mm. Hand sanded down to 600 grit and a couple of coats of spray acrylic (satin finish) later this is the result.
I have sto...
Read this entry »
