Hello all, I had a couple of peeps interested in seeing the process shots of the Cocobolo and Leopardwood table with drawer that I posted, so I thought I’ll blog it here split into a few parts so nobody has to scroll through it all in one go… You can see the finished project here. I don’t have a shot of the small Cocobolo board I was given that inspired this table before I started cutting it up but it was a couple of board feet. There was a lovely rich heartwood section d...
After looking through some other blogs here on LJ and watching some Youtube videos I thought that the tumbling block cutting board was something that looked challenging, cool and something I wanted to try. I learned some good ideas from these other blogs and wanted to share some of my experiences having now made three of these, my setbacks and discoveries to better produce these tumbling block patterns. I purchased a Wixey digital angle gauge as it looked like you really needed to be accu...
The Spline Cutting Jig I use this jig to make all my splines. Basically it is set up to use the band saw to cut triangles out of a long thin strip of wood. It is just a board with a runner for the guide slot and another board fastened at a 45 degree angle. Cutting small pieces on a table or radial saw is a disaster. Your fingers wind up in wrong places and the small pieces fly all over the shop (not good). This is a job for the band saw! If it is done well the splines will look ...
Howdy Fellow LumberJocks! I just joined a few weeks ago and found this blog feature to be pretty cool. It’s great to see so many folks sharing their experiences with the woodworking community. I have actually been blogging about my woodworking (not a commercial site) on Blogger for about six months now, so I hope it’s OK to post the link to my entries there so that I’m not duplicating efforts. (Admins, please let me know if I’m off base. It seems OK based on t...
THE COMMISSION Last week, a gentlemen called me about a project he had in mind for his daughter. He brought over a custom, stained-glass panel that he wanted to use for a wall-mounted, spice cabinet door panel. The client is no stranger to woodworking but doesn’t have time and all his tools on hand or he would have done it himself. I am thankful that he trusted me to create his vision of a lovely gift though. We also had a good time talking about tools and such and I was pretty ha...
- My Journey As A Creative Designer - Woodworking and Beyond - 1780 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Toy costruction - 106 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1805 entries
- dbhost - 432 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 307 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 233 entries
- Betsy - 228 entries
- Dave Rutan - 221 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 203 entries
- Smitty_Cabinetshop - 195 entries