Here is my cherry refreshment table which will feature a single drawer and breadboard ends.-----I started by making breadboard mortises at the router table. The mortises are 1-1/4” deep and cut in multiple shallow passes. -----I used a 1/4” spiral bit to center a 3/8” groove in the breadboard ends. I made an initial pass in the standard right to left direction. Then I flipped the board end for end and made a pass from left to right to avoid a climb cut.-----I set up my t...
Here’s this week’s project designed in SketchUp.
This was my Saturday project. Should’ve been pretty simple but it actually gave me some problems. For one thing it ended up being about an inch shorter than I had planned because trying to get it to sit flat turned out to be the biggest challenge. I know most of you have been there at one time or another. Ok.. just a little off here… oops… that was too much etc. etc… Here’s some pics. The legs and top pieces are cut and ready: I used a clamp to hold the le...
Share the Love This modern sofa table was built for donation to a charity fundraising auction. This slideshow was played to generate more interest in the table by highlighting the construction process. Generating more interest generates more money for the charity. The auction was a bit disappointing overall, but my table brought in the more money than anything else. Funds raised at the auction help support programs for people with developmental disabilities. The winning bidder ask...
My wife, Rita, manages a daily program that keeps adults with developmental disabilities busy. She works personally with these individuals and we see first hand how this program enriches the lives of the participants and their families. Most of them are affected by down syndrome. We choose to support this program every year with donations for the fundraising auction. This year I donated the red bamboo sofa table. This was originally made with the intention of it being a donation. ...
First I want to thank everyone who visited and responded to my last two project blogs; A small table that took a whole lot of work A veneering extravaganza! As always I welcome your comments AND critiques on this latest project. This commissioned sofa table’s concept was borrowed from a late seventeenth century round gate-leg table. The client wanted it in a dark walnut with “antique shading”, and asked that the back of the table be as detailed as the front so it could be u...
- My Journey As A Scroll Saw Pattern Designer - 1558 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1583 entries
- frank - 417 entries
- degoose - 395 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 275 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 188 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 175 entries