Began work on the upper doors of the Wall Hung towards the end of Episode 19 by creating a bead detail on the right door while telling you of a rebate needed at the left door. No pics cutting the rabbet, but the center stiles come together just fine. All four stiles for the upper doors were cut to rough length and grooved for floating panels ‘too long ago’ to remember… The rail boards were measured and marked for their rough cuts; those are the pieces t...
So there I was last night. Down in the shop putting the finishing touches on a piece of cherry that would become a part of the desk I’ve been making for my daughter Madison. The pieces are all cut and dimensioned so now I’m just using my smoothing planes to put that sheen on the face that only a sharp blade can achieve. I have nothing against sanding, but I promised myself a long time ago to keep on practicing when and where I can with the hand planes. I’ve come a long w...
It’s taken me a little longer than I thought to come up with some art for the “woodworkers obit shirt” (in days, not actual hours of work). After looking around for inspiration, I eventually came up with the perfect solution! on using…. A coffin smoother! I like having a couple layers of meaning, if not a little but of punny-ness. Here is the line art of what I have so far… The art still needs some finessing, (shading, detail, some typography… but...
So here we go again. It looks like you folks are having fun making some wooden planes so lets add to the fun. Here is a great little coffin shaped smoother for your collection. This is a fantastic size and a great introduction to making a wooden bench plane. The construction of the parts is a very typical arrangement and the size of wood needed to make this is much easier to find. Here are the plans in several different layouts. The download has four pages. First one is for shop reference ...
Sorry it’s been so long between entries, two-a-day football practices sort of got in the way ;) I guess I’ll continue where I left off… While I was waiting for my steel to arrive from McMaster- Carr I moved my attention to the infill. I had to slightly re-size and refine my original drawing to the final bed angle(50 degrees) and plan out exactly where I wanted the bolts and how the infill would fit in. I used my new drawing to make some paper templates which I just gl...
This is my first blog post, so don’t be to alarmed if it is the biggest piece of garbage you have ever read. I’ll try my best though ;) For the past few months, I have been in a tool craze. Whether it is planes, saws, braces, chisels, or even miter boxes, I just can’t get enough. So when Don W started his blog about making an infill, I saw how easy it could be, and figured why not try it myself. I get a beautiful and functional tool to add to my collection, and some more ...
I looked it up and 111 days ago I said that “in a few days I’ll be done with the Shelton” ... Not surprised that my few days turned into 111. Well it’s finally done with the exception of another coat or 2 of finish on the tote. This is the only plane I have of this style (other than my super smoother from Shampeon – but this one made of all metal and only has a chip breaker with and a cross pin rather than a lever cap), and so any tips / suggestions are appre...
When dealing with handplanes there are two main things you have to have. The first is a really sharp iron. This helps make some great shavings and you can tell a difference between a dull iron and a sharp one. The second important thing to have with handplanes is a flat bottom. If the bottom isn’t flat you won’t end up with nice and flat lumber, or you will be fighting the pushing action while planing. In this video i show how easy it is to get a flat sole. The whole process takes...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries