LumberJocks

Woodworking blog entries tagged with 'smooth'

  • Advertise with us
View A Slice of Wood Workshop's profile

Easy way to finish your finish

09-17-2013 01:39 PM by A Slice of Wood Workshop | 3 comments »

Here is a really easy, simple, and cheap way to take your finish one step further and get the ultra finish. Ok so maybe all your doing is giving it one last rub down, but take the extra step to get a nice clean and smooth final finish. Click here for the video.

Read this entry »


View Wally331's profile

Building an infill smoother #2: Sides and infill build

08-22-2013 02:53 AM by Wally331 | 9 comments »

Sorry it’s been so long between entries, two-a-day football practices sort of got in the way ;) I guess I’ll continue where I left off… While I was waiting for my steel to arrive from McMaster- Carr I moved my attention to the infill. I had to slightly re-size and refine my original drawing to the final bed angle(50 degrees) and plan out exactly where I wanted the bolts and how the infill would fit in. I used my new drawing to make some paper templates which I just gl...

Read this entry »


View Wally331's profile

Building an infill smoother #1: Inspiration and cutting out the sides

06-07-2013 12:24 AM by Wally331 | 5 comments »

This is my first blog post, so don’t be to alarmed if it is the biggest piece of garbage you have ever read. I’ll try my best though ;) For the past few months, I have been in a tool craze. Whether it is planes, saws, braces, chisels, or even miter boxes, I just can’t get enough. So when Don W started his blog about making an infill, I saw how easy it could be, and figured why not try it myself. I get a beautiful and functional tool to add to my collection, and some more ...

Read this entry »


View PurpLev's profile

Beads Box #7: Fill, File, Fo - The filling of Them Pores

12-31-2010 09:51 AM by PurpLev | 21 comments »

I am pretty much done with the construction of the box itself. I had left the pins extra long and needed to trim them off, which is better then leaving them extra short and um… oh shoot. After some trimming and cleaning up the joints today I drilled and installed the hinges for the doors. I used SOSS model 100 hinges, 2 on each door which is good for material 1/2” thickness. I like those hinges, easy to install, fit well, and completely hidden for a nice clean look. You’l...

Read this entry »


View PurpLev's profile

MDB #3: So many cubes - GULP! ....I mean GLUP..... um - GLUE UP

08-02-2010 06:23 AM by PurpLev | 5 comments »

Disclaimer: This blog follows my Magen David Board that is already finished and posted here This phase of the project took on a different pace. it was all hand tools oriented, and I was able to work on it at nights and at quick sessions as there was little setup involved, and not a whole lot of noise. To start. I took my old drill press table that was just hanging around the shop useless after I upgraded it and screwed a straight piece of cherry left over from my milling process to act ...

Read this entry »


View Douglas Bordner's profile

The Slippery Slope #2: The arrival, and so much more.

11-16-2007 07:11 AM by Douglas Bordner | 31 comments »

Well it’s a red letter day here in Nebraska. My Sargent 410 showed up in the mail, and it’s rusty, finished is cracked, but it’s functional and will be ready for it’s bath soon. But this blog is about to be hijacked by an event of more personal significance, albeit a galootish event as well. Long story short, I have done a little side work on some photos for Thomas Angle, who is working up a web page for Owyhee Design, the woodworking arm of his two businesses (The ...

Read this entry »


View mot's profile

Tools #4: Nova DVR-XP Standing Coin Test - VIDEO

06-20-2007 08:24 PM by mot | 9 comments »

Just for giggles, I did a standing coin test with the Nova DVR-XP. Many of you know, this is a new toy…er tool to my shop. I haven’t gotten a lot of time to enjoy it, but I have done a few things. The lathe is fantastic, smooth, lots of power and is a significant upgrade to the lathe I had before. In this series, I’m going to demonstrate some hollowing tools including the famous Termite and the Proforme Hollowers. In this little video, I just do the coin test. The LCD ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com