View Video on YouTube A few months ago I made a slab coffee table. It was quite an undertaking! I have 3 other blog entries on LJ about this. The first one is on how I Flattened the Slab with a Router Jig The next one is on how I constructed the base The other one is on how and WHY I inlaid the stars in the top. I also have a blog article on my website about how I did the Carving and Texturing on the Tree Trunk Base The video in This entry is an overview of the ENTIRE ...
<div> <div>Get your own valid XHTML YouTube embed code</div></div> I am having a lot of trouble getting the video to look right in this blog! It looks wrong here and if you click full screen it looks even worse! If you REALLY want to watch it then it is best to click on the button to see it on YouTube. It looks fine there. Otherwise, well, you get the idea! If anyone knows the RIGHT way to embed videos then I would love it if you would ...
Well after many hours in my cold shop and a couple of trips to my neighbor’s cabinet shop, the table top is ready for finishing. I have to thank my neighbor, who owns a home remodeling company, for offering me the use of his cabinet shop. It saved me probably two full days of flattening the top First, I glued up the top and then took it back to the cabinet shop to flatten and sand down to 150 on their massive 54” wide-belt sander. They also cut it to length for me on their A...
Nakashima Inspired Walnut Slab Table #2: Filling Knots and Cracks, Butterfly Inlays, and and a Start on the Base
I’ve made some progress on the kitchen table in the last few days. I started filling the knots and cracks in the top with epoxy. This is a messy job, and its a pain to get all of the bubbles out. I’m starting with the bottom side to perfect the technique. I burned the epoxy in one place where I held the torch too long trying to get the bubbles out. That just made a ton more bubbles that wouldnt come out. I also practiced making butterfly inlays on some scrap wood. Thi...
Mesquite Slabs 10/4 thick, 24-36” wide, 17’ Long. Would make great conferance table or bar top. Check out the figure in these!!
Got a chance to slab a large walnut log today that I just picked up. Put a brand new chain on my mill and took off cutting. Went pretty good till the second cut when my saw found that 7 inch bolt that was just waiting to snag my chain. Had to resharpen a couple times but all said and done I got seven nice slabs all 3-4 inches thick. Large ones are about 36 inches on the small end to about 44 inches at the large end by 10 feet long. I will be posting on my website after awhile. Gota ge...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries