LumberJocks

Woodworking blog entries tagged with 'sketch-up'

  • Advertise with us
View PJ72's profile

Season of shop upgrades #2: Table Saw Outfeed

187 days ago by PJ72 | 3 comments »

A need for out-feedI have tried using out feed rollers and various stands for some time and have never been satisfied with the results, especially when cutting large sheet goods on the table saw. For reasons including safety and quality of cut, I decided that I needed an out feed table system. Primary ConcernFor my garage workshop I needed a solution that was easily stored out of the way quickly with minimal storage space. I patterned the out-feed table on a design by Dwayne Intveld in t...

Read this entry »


View Ryan Haasen's profile

New Shop! #1: Planning & Moving

802 days ago by Ryan Haasen | 4 comments »

We are adding on to our shop! My dad and I have been talking about it for a while and have finally pulling the trigger! Our current shop is 44’ by 36’ (1,584 square feet), and every inch of that space is occupied. Here’s what it looks like right now: We will be adding 12’ to each side and 12’ on the back. It will then be 60’ wide and 56’ long (3,360 square feet). The extra 12’ on each side will be separated by a wall from the middle (large) r...

Read this entry »


View Tiggr's profile

Sofa Frustrated

1107 days ago by Tiggr | 7 comments »

For several months now, I have been admiring a couch I found in a local furniture store. I absolutely LOVE the design and the way the pieces fit together. I like that it is deep enough to be good for cuddling, which also means it has enough depth to handle long legs comfortably, which a lot of couches simply don’t do. I like that it has ottomans that fit in with the curvature of the front of the couch and make it long enough to act as a bed if the guest room is filled… or the b...

Read this entry »


View AttainableApex's profile

Super Duper Sled #1: The Sketchup Plans

1448 days ago by AttainableApex | 11 comments »

Well here is my latest sled design. This sled is a combination of many sleds that i have seen in the past. One sled that really influenced it, is the super sled by john nixon at eagle lake woodworking. I like the t track on the sled part (the sheet part) but i am going to use real t track. I also liked the t track on top of the fence, which i incorporated, but it stops there. This sled should be able to do just about everything. You can cut 45’s ( blade tilting at 45 deg ) and every o...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase