When you’re building a traditional piece of furniture, it makes sense to keep everything… well, traditional. You wouldn’t put a digital face on a Townsend clock. But a workbench is different. We built our bench in the Roubo style for its features more than the old-timey tradition. (Watch our 2X6 Roubo woodworking bench videos here) So equipping it with a modern vise isn’t sacrilege, it’s a no brainer. The only question is, what kind of vise is right for your bench. There are primarily two kin...
Hello. Its been 6 months since I finished my bench and I have spent over 1000 hours on it. Now that I have gotten a good feel for how the bench works and its ups and downs I thought I would write an update on it. To start I’ll mention the modifications I made. The first was to add leather to the pads on the hold fasts. With leather I no longer need to place scrap wood between the work pieces and the hold fasts to prevent denting. If you have hold fasts (which you should) I would r...
Hello, this is probably my last workbench blog entry, now that my bench is complete! Like I said in my last blog, the workbench has been complete a couple weeks before this post on November 12. With my last post I had wrote about completing the base. After I had the base assembled, glued up, and drawbored I placed the bench top onto the base. Previous to putting the top on the base I had put one coat of boiled linseed oil on the underside of the top. The top is removable from the base, I deci...
Hello. This is a video I made to show the details and construction of my bench so far. I go over the shoulder vise construction and joinery. I hope it may be useful to those who may be contemplating bench designs. I will make a few more videos as I progress, and I will have a video or two on making wooden screws and nuts aswell.
I have been experimenting more and more with hand tools, and I learned quickly you need a proper workbench to get the most out of hand tools. The last bench I built works really well for power tools and assembly, but it’s not stout enough to handle hand planning. It also lacked the necessary vises and bench dogs needed to secure your work. So I began my search for the perfect bench to use with hand tools. I’ll tell you right now, perfection is hard to come by for workbenches. Everyone ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries