LumberJocks

Woodworking blog entries tagged with 'shop vac'

  • Advertise with us
View steliart's profile

Drill Press Station - Table/Lift/Fence/Vise/Drum Sander

06-16-2013 05:48 PM by steliart | 7 comments »

Drill Press Station – Table/Lift/Fence/Vise/Drum Sander My drill press is a small inexpensive bench top type, and until I get a good floor type one I am trying to get the best out of it. One of the first things I did was to change its old pole with a stainless steel one. Why stainless steel? Well it was the only piece I could find that matched the diameter and you can slide up and down smoother. So the pole got a lift-up of about a foot taller. One of those ikea wire sh...

Read this entry »


View Harley130's profile

Shop Vacumn Cart #4: Day 4 - Final

05-20-2013 01:36 AM by Harley130 | 2 comments »

After not getting to work at all Saturday in the shop because of family commitments, I got to work on my project most of the afternoon today. I wasn’t feeling to spunky after not getting back home till almost midnight last night. That was two hours after my normal bedtime. I trudged along and manged to complete the project and declared Victory at about 7:30 pm. I added an additional modification at the last moment for three more attachment storage holes and then decided to use a tub...

Read this entry »


View Harley130's profile

Shop Vacumn Cart #2: Day 3

05-17-2013 09:42 PM by Harley130 | 0 comments »

Made good progress so far today, made the top and bottom shelves. Drilled the 2-1/2” holes in the top shelf and the 3” cut out for the vac hose. On the bottom shelf, drilled the 1” holes for the dowel rods and cut the 3” slot for the vac hose. Assembled the upright, decided to use my Kreg pockethole jig to assemble the upright and to fasten it to the base. Still have to make the hinged cover that goes over the top of the Dust Deputy. This cover also has a handle c...

Read this entry »


View Harley130's profile

Shop Vacumn Cart #3: Day 2

05-17-2013 04:56 AM by Harley130 | 0 comments »

Got the base and sub-base cut out yesterday. Had to revise the drawing several times to fit my shop-vac from the original design. Today was mostly a bust on working on the cart. Friend came by and we made a trip over to Mike’s Discount Store to see if anything new had came in. Mike’s is a returns/close out store that stocks about anything you can think of. Most is damaged or NOS, but you never know what your going to find.After lunch got back in the shop for about an hour and...

Read this entry »


View Todd A. Clippinger's profile

Reinforced Mounting Lid For The Dust Deputy

04-23-2013 08:26 PM by Todd A. Clippinger | 6 comments »

Since I did the Dust Deputy Review in Episode 27, I have been getting questions and have decided to answer them publicly with a video so everyone may benefit from the answers. In this video I show how I reinforced the 5 gallon bucket lid that I mount the Dust Deputy to. In Episode 28 I gave information to help the woodworkers decide which shop vacuum size might be the best to use with the Dust Deputy. Here are the last 2 videos: Episode 27: Dust Deputy Review Episode 28: Choosi...

Read this entry »


View Todd A. Clippinger's profile

Choosing A Vac For The Dust Deputy

04-20-2013 03:09 PM by Todd A. Clippinger | 11 comments »

In my last video I did a review of the Dust Deputy and showed how effective it is. ​This prompted several people to ask me about what size shop vacuum is necessary to work with the Dust Deputy. So in this video, I decided to explore that question and share the results with you. ​​Even if you are not planning on using a Dust Deputy, you might find the information helpful in your decision to buy a shop vacuum. If you have not seen how effective it is, check out my previous video where I r...

Read this entry »


View Gary's profile

Yet another DIY dust separator cyclone #1: Overview

07-30-2012 01:07 AM by Gary | 2 comments »

Here’s a picture of my cyclone dust separator shop vac: I used three different sizes of chlorine buckets from the pool supply store (we bought them full…), an ancient Craftsman shopvac, some scrap pvc tubing, a couple bought pvc fittings, a couple types of epoxy glue, an HF furniture moving dolly for the casters, a section of a pool vac hose which we’ve never used, and some plywood scraps. I studied all the cyclone designs I could find, many here on LJ, many on you...

Read this entry »


View Sheila Landry (scrollgirl)'s profile

My Journey As A Creative Designer - Woodworking and Beyond #652: The Sands of Time

03-26-2012 09:55 AM by Sheila Landry (scrollgirl) | 4 comments »

Most woodworkers that I talk to don’t like sanding. Of the many steps in the process of doing a woodworking project, I think I am pretty safe in saying that it is the least liked part. In fact, I am amazed at the number of people who spend hours on a project that simply skip over the sanding step completely. I don’t always understand why they would do that. While it may not be the most pleasant part of making a project, it is among the most important in most things that we cre...

Read this entry »


View mafe's profile

Shop vac blast gate splitter and a ‘dust can’ (this one is for Dan / Maveric)

11-15-2011 03:12 AM by mafe | 18 comments »

Vacuum splitter and a ‘dust can’this one is for Dan / Maveric. Yes the dust goes to Dan this blog is dedicated to him and his recovery… Why? Because Dan just had a terrible time and this might have some roots in the dust from the shop! I personally sometimes sneeze and cough when I am done with sanding and I have had my thoughts on this for a while.My Vacuum is a shop vacuum, but just a standard one from Atlas copco and I used simple 50 mm 2 inch plumbing to distribute it s...

Read this entry »


View Sheila Landry (scrollgirl)'s profile

My Journey As A Creative Designer - Woodworking and Beyond #233: An Unexpected Adventure

01-22-2011 02:57 PM by Sheila Landry (scrollgirl) | 12 comments »

Life is full of adventure. Sometimes adventure comes into our lives uninvited. Other times we set out to find it. And then there are the times when we stumble upon it unintentionally and it takes us by surprise. Yesterday was one of those times for me. The day began normal enough. I got up and did my mail and wrote my blog here and did all of my regular morning routine. I had planned on finishing the two new candle trays and photographing them and moving on with other projects. M...

Read this entry »


« prev 1 2 3 next »
23 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com