Hello everyone. After another productive Saturday in the shop I came up with this French cleat saw blade storage option. It can be modified to your dimensions and needs as always. It features two rows of blade storage with 6 partitions each. The dividers can be removed for larger blades such as 1/2” or 3/4” bandsaw blades. You could even reduce the spacing on one of them for more table saw blades. For added storage options on the outside you could use dowels, screws, or nails. ...
This is a re-edit of the video that got me started doing videos. Unfortunately I knew very little about shooting and editing video at the time. In fact, I shot the video with a web cam, so the video quality is poor in parts. The re-edit gives it a nice face lift, but perhaps in the future, when I run low on topics, I can re-shoot the video. (Full steam ahead on Router Inlay!) Here is the link: Working with Melamine
I needed a place to store really small cut-offs. That, and a place for my shop TV.
I just did another video on my drawer storage unit in my shop. I figured I would share it with everyone! Thanks for watching!
So the first phase of my workshop reorganization/upgrade had to be my workbench. In my first entry I mentioned that my current “workbench” was actually two metal framed shelving units which stand 3’ tall and have a plywood top. When I bought my home in 2011 this shelving unit was already in the garage half loaded up with old paint, left over tile and a few extra trim boards for the kitchen cabinets. At the time, I didn’t have the setup or time available to start bui...
Grandkids And The Studio Furniture Movement The space-time continuum changes when you add the grandkids factor to the intended work progress equation, but that is OK. Rita and I had a couple of the grandsons for the weekend and they spent some time in the shop with me. I went out to the shop Saturday morning with the 2 boys in tow (ages 3 and 4) and thought that I would finish my organizational efforts in just a few hours – silly me. It took me all morning just to install the ceil...
Okay, so I’ve been good about the projects challenge, just bad about the posting. 27 days in, 1 project left to do… maybe I’ll wait until Friday night for some last minute, down to the wire drama! Here’s a quick look at much of what has been going on in, and outside of the shop. Quite the mix of big and small. I wish I was able to do more “want to” than “have to” but I’m also VERY happy to have cleared a lot of those projects off the p...
Part of the problem, or challenge, of getting a project done every day (or doing anything in the shop ever) is the dance. The hop, skip and jump of winding your way around all the offcuts, jigs, scrap that too nice to trash, and trash that just doesn’t get out the door. So, in my quest to move forward to having actual floor space, and plenty of covered storage for tools and materials, I’ve stepped away from the lathe, took some plywood and got started on some BIG storage boxes....
Getting Closer To Done I don’t think that a person is ever done with organizing the shop but I am getting close to done for this round of organization and resetting the shop. I finished my drywall repairs and painted the wall. I have 3 cans of old paint and all of them are marked “shop walls” but none of them match. My guess is that I did not have them labeled and at some point I opened them for identification, thought it looked like the shop wall color and marked it a...
It Just Won’t Stop! I tore out some double doors at the end of the shop that I never use, I need the wall space to hang my clamps. I figure that since I started doing this little reorganization I might as well finish it. I usually bite things off a couple days at a time and then wish that I had finished or done more. There never seems to be a convenient time to interrupt my work schedule for improving shop conditions, but the payoff is always big when it comes to improved work fl...
- My Journey As A Scroll Saw Pattern Designer - 1582 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1607 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 185 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries