I just did another video on my drawer storage unit in my shop. I figured I would share it with everyone! Thanks for watching!
Hello everyone. After another productive Saturday in the shop I came up with this French cleat saw blade storage option. It can be modified to your dimensions and needs as always. It features two rows of blade storage with 6 partitions each. The dividers can be removed for larger blades such as 1/2” or 3/4” bandsaw blades. You could even reduce the spacing on one of them for more table saw blades. For added storage options on the outside you could use dowels, screws, or nails. ...
I needed a place to store really small cut-offs. That, and a place for my shop TV.
So the first phase of my workshop reorganization/upgrade had to be my workbench. In my first entry I mentioned that my current “workbench” was actually two metal framed shelving units which stand 3’ tall and have a plywood top. When I bought my home in 2011 this shelving unit was already in the garage half loaded up with old paint, left over tile and a few extra trim boards for the kitchen cabinets. At the time, I didn’t have the setup or time available to start bui...
This is a re-edit of the video that got me started doing videos. Unfortunately I knew very little about shooting and editing video at the time. In fact, I shot the video with a web cam, so the video quality is poor in parts. The re-edit gives it a nice face lift, but perhaps in the future, when I run low on topics, I can re-shoot the video. (Full steam ahead on Router Inlay!) Here is the link: Working with Melamine
Grandkids And The Studio Furniture Movement The space-time continuum changes when you add the grandkids factor to the intended work progress equation, but that is OK. Rita and I had a couple of the grandsons for the weekend and they spent some time in the shop with me. I went out to the shop Saturday morning with the 2 boys in tow (ages 3 and 4) and thought that I would finish my organizational efforts in just a few hours – silly me. It took me all morning just to install the ceil...
Getting Closer To Done I don’t think that a person is ever done with organizing the shop but I am getting close to done for this round of organization and resetting the shop. I finished my drywall repairs and painted the wall. I have 3 cans of old paint and all of them are marked “shop walls” but none of them match. My guess is that I did not have them labeled and at some point I opened them for identification, thought it looked like the shop wall color and marked it a...
Almost Done I only have a few things left on the list for this round of shop organization. I need to get the clamps hanging on the wall. At the moment they are just laying on the floor. Before this started they were standing, piled in a corner. It was difficult to access them or pull them out individually, but I cannot neglect them for one more day on the floor. This has been their temporary home while I finished the wall. I also need to hang the extension cords. I have a lot of ...
All of my measuring and squaring tools were spread out throughout the shop. I wanted them all in one place, so I made this. Watch the video here: https://www.youtube.com/watch?v=-IOwoCwpg54
This is just a quick video to say thanks to fellow woodworker Jay Bates. Check out his video to see how he made some simple and inexpensive brackets that can be used for shelving or lumber storage. Thanks for watching. Take care.
- My Journey As A Scroll Saw Pattern Designer - 1635 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1660 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 228 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- robscastle - 188 entries
- BritBoxmaker - 188 entries
- Rustic - 188 entries
- Chris Davis - 184 entries