Back to the shop to save the top. I started by edging all sides with redwood, thus covering the misplaced hole. I carefully marked the new holes. I clamped the top to my workbench and dragged the drill press over for a more precise hole placement. Flip it.. Cut off saw and bar stock. Testing. I hammered in the bar after fudging with some washers and a spacer or two. The case hole is 1/16” larger than the bar. Watch it spin… StopsI installed flip tabs ...
Right Click to DownloadRight Click to Download in HDSubscription Options In the past, I’ve discussed how shop improvements are never done. As our needs and tool preferences change, the shop has to be able to adjust accordingly. If not, you will likely be faced with an inefficient and potentially unsafe work environment. If you can believe it, its already been over a year since Nicole and I moved into our new house. And for those that don’t know, we are indeed still carrying ...
Grandkids And The Studio Furniture Movement The space-time continuum changes when you add the grandkids factor to the intended work progress equation, but that is OK. Rita and I had a couple of the grandsons for the weekend and they spent some time in the shop with me. I went out to the shop Saturday morning with the 2 boys in tow (ages 3 and 4) and thought that I would finish my organizational efforts in just a few hours – silly me. It took me all morning just to install the ceil...
Getting Closer To Done I don’t think that a person is ever done with organizing the shop but I am getting close to done for this round of organization and resetting the shop. I finished my drywall repairs and painted the wall. I have 3 cans of old paint and all of them are marked “shop walls” but none of them match. My guess is that I did not have them labeled and at some point I opened them for identification, thought it looked like the shop wall color and marked it a...
Purging the Lumber Rack Woodworkers naturally have the hoarding instinct and this must be kept in check with strict discipline. The lumber rack has been gathering leftover material and unique pieces of wood for years with little culling to insure the quality of the collection. I cleared three small shelves first and gave a good stack of wood away to a local LumberJock member. He got a Porter Cable dovetail jig for Christmas and this will keep him busy with making boxes. I had the wood b...
Coming Down The Home Stretch Yesterday I finished the mud work where I removed the double doors. I also took the opportunity to patch the wall and ceiling where flying projectiles had left their impressions. I mounted a couple of hose reels that I bought several years ago. I had bought three originally and I mounted one but put the other two on the shelf. The first one broke and I tossed it during this round of organization. Now I have two but that is quite adequate for my shop. I us...
Almost Done I only have a few things left on the list for this round of shop organization. I need to get the clamps hanging on the wall. At the moment they are just laying on the floor. Before this started they were standing, piled in a corner. It was difficult to access them or pull them out individually, but I cannot neglect them for one more day on the floor. This has been their temporary home while I finished the wall. I also need to hang the extension cords. I have a lot of ...
As to be expected, do enough woodworking and you will need various sizes of screws for all the different projects you work on. Then you end up with extra boxes of screws. I had all of mine just stacked together in a small bin. The bin was overflowing and it was just a pain to find a place to store the bin. It constantly got moved around. So, I made a small shelving unit to hold all the different screw boxes. It’s based on one I saw April Wilkerson make. You can see a link to her vide...
We’ve had this old coat/key rack hanging in our garage collecting dust and whatever else didn’t have a spot. It’s basically falling apart. I also needed a dedicated spot to hang my shop apron. So, while deciding what to do, I noticed the old coat rack and came up with this. Watch the video here: https://www.youtube.com/watch?v=2VOvrG4Qz2w
Haven’t posted in awhile re: my tools and shop. I have made progress and have shared that with a few LJ’s. I have succeeded in getting through my electrical inspection and now have an approved box in the Cau Haus. I ran metal conduit for my 220 single phase cabinet saw. Had some sticks of metal conduit from a project many years ago. Had to do some tricky(for me) bends and twists to get around ceiling joists and the metal gas pipe for the furnace. Of course I screwed it up! ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1730 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1755 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 238 entries
- Betsy - 228 entries
- stefang - 213 entries
- Stevinmarin - 212 entries
- robscastle - 208 entries
- Todd A. Clippinger - 207 entries
- Dave Rutan - 206 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries