I haven’t got a very large workshop, or bench. I enjoy using hand tools, and often make small rip cuts at my bench in the leg vise. I’ve wanted a small panel saw, in the 16-18” range, for a little while now. I made the decision to try making my own, and a couple of weeks ago I ordered a saw plate and hardware from Two Guys In A Garage Toolworks (www.tgiag.com). I ordered the 6-1/2” x 18” x 0.032” thk small panel/half back saw plate. My blank saw plat...
As some of you may have seen, I built a prototype of a small infill smoother (blog starts here). This went well enough that I decided to make one for myself from precision ground steel. Well, as it turns out, with the way lengths work for precision ground O1, I ended up buying enough for 3 small smoothers and 4 blades, which is perfect, since the prototype needs a blade. So off went my money and a few days later, a package arrived with the steel, some new drill bits, and a scriber. A go...
Cut off and mounted, the brass point actually looks kind of nice. I’ll just be a little less generous with the epoxy next time, so I don’t end up with that overfill bead. I mounted the radius cutter, going about 1/16th to 1/8th deeper than the brass pivot point, so that the cutter will remain as perpendicular to the work as possible. Since the holes in the cutter to attach it to the tool are oval, there is some room for adjustment later on. It isn’t perfect, ...
The ever popular Joel over at Tools for Working Wood (also Grammery Tool), whom I also got my excellent Holdfasts from, has produced a nice bowsaw kit. I’ve been interested in picking up a tool like this for a while, as I’m inherently lazy, and I don’t like to take the resaw blade off my bandsaw for light scroll work, so I’ve been considering a hand tool to save me that time. The website also makes some excellent measured drawings available in PDF form, even if you...
My step father is an avid wood turner and we where talking shop one day a couple or months ago and I found out throughout our conversation (yes I was listening and paying attention) that he was in need of a depth gauge to use when turning the cool bowls he makes in his home shop! I thought this would be a neat project to make while using the box store craftsman philosophy of Re-purposing materials, being a frugal craftsman and filling a need in the shop! I look through my old woodwor...
Outfitting the workshop #5: One of the inestimable pleasures of being a Lumberjock...making your own tools!
Well there are probably a lot of other things I should have covered in the outfitting of my shop before I posted this, but I’d probably never manage to post anything if I did it in chronological order :-) Any way I am working on a two step red oak step stool for my shop (I am hoping that Jenn sees it and determines the ugly metal one in the kitchen belongs in the shop and that this ‘ugly’ piece of shop furniture belongs in the house LOL!). The construction requires some ...
Not much left to do. I picked up some proper braided 65lb test fishing line. Plenty strong enough for our purposes. As the online documentation mentions, I used 4 loops, and made it snug enough that I could, with effort, still remove the blade when necessary. Now that it actually was tensioned like a working saw, I had no choice but to give it a try! You may notice that offcut from my circle cutting inlay tool test. I decided to follow the circular groove, and even with the low ...
I was very intruiged by Steve Latta’s DVD for Lie-Nielsen “Fundamentals of Inlay: Stringing, Line & Berry” and the associated line of inlay tools that they offer along with it. I learned (by way of the Villiage Carpenter) that Steve has been touching a longer course on inlay for quite some time, and used to advocate the manufacture of your own tools, in the style that Lie-Nielsen is now offering. When looking at those offerings, I did think that several of them could...
- My Journey As A Creative Designer - Woodworking and Beyond - 1736 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1761 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 239 entries
- Betsy - 228 entries
- robscastle - 215 entries
- stefang - 214 entries
- Stevinmarin - 212 entries
- Dave Rutan - 209 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries