LumberJocks

Woodworking blog entries tagged with 'shield'

  • Advertise with us
View RaggedKerf's profile

Lamp Mounting Plates Day 1: The Design

668 days ago by RaggedKerf | 0 comments »

For the version with pictures, please click here. My father-in-law has commissioned me (I guess that’s still the right phrase, though it’s really pro bono since he has given me a router and table, grinder and drill!!! I owe him!) to make some mounting plates for a couple outdoor lights he wants to mount on his garage. Naturally, I jumped at the chance. More woodworking! He wanted a shield-like design to go with the lights. Here’s what I came up with: To give y...

Read this entry »


View jeff_wenz's profile

"Fold up" ironing board (reverse engineering) #4: Other important details

1445 days ago by jeff_wenz | 4 comments »

So some important details I have not mentioned yet. The routed groove: There is 2 ½” inches from the front of the case to the groove. The top of the groove bends in ½” Heat Shields:Use aluminum for protection. I purchased a 24×6” piece and cut it in half. I sprayed it with white epoxy appliance spray paint then mounted it with 3M’s Super 77 spray adhesive. Shelf:Install in coordination with your heat shields. This put my shelf 12” down from the top. Electrical...

Read this entry »


View Dick, & Barb Cain's profile

Dust Hood 12/06/2006

2813 days ago by Dick, & Barb Cain | 0 comments »

I finally did some wood-turning yesterday, & my dust shield worked great. It can be slid to follow along with the area your working when doing a longer turning. I was concerned that the plastic window on it would get dirty because of static, but it stayed clear of dust. It also didn’t interfere with my work.My sweetheart was setting up her display of Dickens carolers yesterday, & mentioned she should have a light post. I surprised her, & made one for her. I’ll show it...

Read this entry »


View Dick, & Barb Cain's profile

WHAT'S UP? "While I'm out in my Shop". #7: Things to do 12/04/2006

2815 days ago by Dick, & Barb Cain | 5 comments »

This one is also out of the order intended, but I’d like to keep these things together. I still haven’t completed the workshop reorganization project. There seems to be so many distractions that sidetrack me. I recently made a combination shield, & dust hood for my lathe. I looked at a lot of them that you can purchase, but I opted to design my own to fit my own lathe better. It slides under my lathe bed. I guess you can put this into “Getting workshop organ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase