LumberJocks

Woodworking blog entries tagged with 'shelves'

  • Advertise with us
View Jack Barnhill's profile

Sketchup Models of Shop Furniture for a Small Shop #1: Mobile Shelves, Expandable Assembly Table and Materials Cart

1904 days ago by Jack Barnhill | 10 comments »

I have a small shop, about 200SF. It’s not as small as it once was, about 90SF, and it’s not as big as what I hope to have some day, about 600SF. To keep from climbing over things and make it easier to move things around to accomdate the operation of the moment, I thought I would adopt the “everything on wheels” strategy and double up what tools I could in single cabinets. So, to make sure that I had the right designs and that everything would fit in the shop and ...

Read this entry »


View dustbunny's profile

Torque WorkCentre #5: Birds Beak Shelving

1370 days ago by dustbunny | 16 comments »

About two weeks ago Hopdevil posted a question to the forum about shelving he had seen in the Martha Stewart Magazine. It is called birds beak shelving.Well thank you Hopdevil, a gun went off in my head. This would be the perfect project for the Torque WorkCentre.So off I went to my shop with video camera in hand and shot this remedial video showing how easy this project was to make. It was more difficult to get the camera and my mouth working at the same time so I think it shows how I really...

Read this entry »


View Gary Fixler's profile

log [drying] racks #2: finished!

1867 days ago by Gary Fixler | 13 comments »

I got the last 2 of the 5 sections built last week, sans the corrugated roofing. Here’s how I did it, at warp speed: This marked the first use of my new truck, for 2×4s and small ply panels from Home Depot. What a joy! As an aside, when I cut this particular 2×4 to length… ...I made a new friend. I think it’s a fat bird. As another side, whenever I stack up cut 2×4s like this, I get a terrific urge to build a deck, or workbench: ...

Read this entry »


View Gary Fixler's profile

Wood Art #9: cute use for scrap wood - hanging block shelves

1526 days ago by Gary Fixler | 7 comments »

Got a bunch of little wood scrap blocks, some planks, rope, and hooks? I found this online: More pics.

Read this entry »


View Gary Fixler's profile

log [drying] racks #1: the initial build

1876 days ago by Gary Fixler | 4 comments »

This is a bit old now, as I built these starting in late March this year, but I’m expanding them a bit now, and wanted to post some updates on that. That requires getting off my butt and posting the original stuff I’ve dragged my heels on. With the trees that have fallen over, and the random large branches I’ve managed to find here in LA, I had an awful lot of logs for a 0.18 acre lot. I recently mapped out my tiny 0.18 acre lot, breaking it into 30 equally sized squares, an...

Read this entry »


View Chips's profile

Corner Bookshelf

2285 days ago by Chips | 7 comments »

When I read about challenge 04 in Popular Woodworking Newsletter my first thought was to give it a try. The next thought was to design something that didn’t look like a box. Then I remembered that I had turned a square book case 45 degrees and put it into a corner. From there I took inspiration from other project I have built. A Corner Pantry Cabinet I built for my daughter and a reproduction of a 200 year old spice box that I built for my wife. When you add to that my enjoyment of carving...

Read this entry »


View Sailor's profile

Simple Garage Shelving Unit

900 days ago by Sailor | 3 comments »

Here is a super simple project that I made with some scrap lumber I saved from a remodel job last week. Our garage has been needing some more shelves so I figured these could be put to good use, I was right. I know to a lot of people here this project will seem silly and to easy but I bet someone out there is looking for the very basics. Thanks for watching!

Read this entry »


View Jeff's profile

Closet Rebuild #1: Shelf Pin Jig

2630 days ago by Jeff | 4 comments »

As part of the revamp of the closet in our loft that collapsed a few moths ago, I built this jig to ensure all the holes for the shelf pins would line up and I (hopefully) won’t have any wobbly shelves. It was inspired by a jig sold by one of the well-known woodworking retailers. I couldn’t see buying one when I had all the necessary stuff sitting around (short of a special bit). In hind sight, the time spent might justify the cost. What can I say? I like building jigs. All the...

Read this entry »


View Gary Fixler's profile

003: under [garage] door shelving cabinet #4: cabinet doors work begins

1867 days ago by Gary Fixler | 4 comments »

For the doors, I had a look through my stock piles, and this board, a 1/4”x8”x4’ tulip poplar plank – picked up at Home Depot months ago simply because it was so unusually pretty – really spoke to me. The picture makes things a lot more yellow than they are in real life. It’s loaded with purples (which will probably fade in time to brown), browns, greens, yellows, and lots of gradients. From those dimensions, I built a Sketchup model of the doors ove...

Read this entry »


View Gary Fixler's profile

003: under [garage] door shelving cabinet #5: and now, some doors

1866 days ago by Gary Fixler | 5 comments »

When we last left off, I was about to glue up the first cabinet door. Here it is clamped and drying: Here’s a detail (the wet marks at the left are just from wiping out glue – they dried up and disappeared): And because time-lapse videos are so fun, here’s the glue-up of the second door: And now the finished doors. Well… finished gluing together. Now there’s still sanding and coats of whatever I decide to use. I’ve been thinking of de...

Read this entry »


1 2 3 4 next »
35 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase