My Walnut board was 6 3/4” wide, but it was dished a little, so I ripped it in half, & joined it in 4 sections for the top, I also glued some Ash to the edges. The Top clamped up.Now I have to go out, & start with the breadboard ends for the Tabletop. This is one of the Shelves, using my new Irwin Clamps
About two weeks ago Hopdevil posted a question to the forum about shelving he had seen in the Martha Stewart Magazine. It is called birds beak shelving.Well thank you Hopdevil, a gun went off in my head. This would be the perfect project for the Torque WorkCentre.So off I went to my shop with video camera in hand and shot this remedial video showing how easy this project was to make. It was more difficult to get the camera and my mouth working at the same time so I think it shows how I really...
Today I cut & fitted the shelves. Dry assembled the whole table. Now I’ve got a lot of sanding, & pegging to do. This should keep me busy for awhile.
I had to make some holes for shelf supports in the entertainment unit I am making, so I set up the Torque Workcentre ...I used the travel limiting stops on the Y axis… marked the distance on the sides of the boards…. locked the X axis …marked the back fence in line with the router bit… I used a spiral upcut 8 mm bit…moved the router to the backstop on the arm and drilled a hole them moved the router forward to the stop and drilled another hole… moved the ...
I meant to post this post quite along time ago. I guess I got sidetracked and I forgot.Today I found the pictures I had taken for it and decided to post it now. Let me start off that I have an extremely small and weird shaped shop, so anything that saves space for me is not only a must do it is an absolute necessity. My shop is only 25 feet long by 6 feet wide. In it I have a couple scroll saws out at one time, 2 belt sanders out at once, one is a 1×40 and the other is a 4×36. A...
All the pieces for both units were cut out at the same time, so there was another waiting to be assembled. I spent some time today on that. Here it is next to the first one, waiting to be filled up: I’ll have to find a new place to hang my roller stand, but that’s okay, as I’ve only been able to hang one of the two here on its over-the-rafters hooks. Right now it’s immediately in front of the new shelving: I learned something interesting about French clea...
I got the last 2 of the 5 sections built last week, sans the corrugated roofing. Here’s how I did it, at warp speed: This marked the first use of my new truck, for 2×4s and small ply panels from Home Depot. What a joy! As an aside, when I cut this particular 2×4 to length… ...I made a new friend. I think it’s a fat bird. As another side, whenever I stack up cut 2×4s like this, I get a terrific urge to build a deck, or workbench: ...
Sketchup Models of Shop Furniture for a Small Shop #1: Mobile Shelves, Expandable Assembly Table and Materials Cart
I have a small shop, about 200SF. It’s not as small as it once was, about 90SF, and it’s not as big as what I hope to have some day, about 600SF. To keep from climbing over things and make it easier to move things around to accomdate the operation of the moment, I thought I would adopt the “everything on wheels” strategy and double up what tools I could in single cabinets. So, to make sure that I had the right designs and that everything would fit in the shop and ...
When I read about challenge 04 in Popular Woodworking Newsletter my first thought was to give it a try. The next thought was to design something that didn’t look like a box. Then I remembered that I had turned a square book case 45 degrees and put it into a corner. From there I took inspiration from other project I have built. A Corner Pantry Cabinet I built for my daughter and a reproduction of a 200 year old spice box that I built for my wife. When you add to that my enjoyment of carving...
Now this kitchen is just taking up space in my shop. Everything is sprayed. The drawers are all in. I’ll wait on hanging the doors till I’ve installed the kitchen. This has been fun. I’ve just been installing for way to long. Nice to get back in the shop.The new mats seemed to have helped quite a bit. I can put in my full four hour day with out any complaint. I’m looking forward to building more in the shop. I’ve got two small jobs backed up. I wonder when I̵...
- My Journey As A Creative Designer - Woodworking and Beyond - 1782 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Toy costruction - 106 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Woodworking on a Half-Shoestring - 77 parts
- Sheila Landry (scrollgirl) - 1807 entries
- dbhost - 432 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 307 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 235 entries
- Dave Rutan - 228 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 204 entries
- Smitty_Cabinetshop - 195 entries