I am pretty much done with the construction of the box itself. I had left the pins extra long and needed to trim them off, which is better then leaving them extra short and um… oh shoot. After some trimming and cleaning up the joints today I drilled and installed the hinges for the doors. I used SOSS model 100 hinges, 2 on each door which is good for material 1/2” thickness. I like those hinges, easy to install, fit well, and completely hidden for a nice clean look. You’l...
I mentioned it in the previous post and as I was working on the drawers I had the main carcass take the finish to make use of time. Mahogany much like Oak has large open pores. My finishing goal was more for practice than necessity, but I was aiming for an antique polished look – shiny outside. I knew I would have to fill in those pores if I want an even polished surface. So my plan was to start with a filler coat which I tried to concoct using dewaxed shellac and mahogany sanding sa...
I have heard countless times that you should never put polyurethane over waxed shellac. From books to magazine articles to forums to DVD’s, the message is always the same. Even the back of the shellac can itself says not to use polyurethane. Now I have always taken the “better safe than sorry” route, simply avoiding regular waxed shellac. But there have been so many occasions where I have heard of people accidentally using waxed shellac under polyurethane with no det...
Last night I started this blog. You can see Part 1 here: http://lumberjocks.com/davidroberts/blog/14843 I started with the footboard and almost screwed it up. I thought dousing it with stripper could melt the glue. I had been told that professional refinishers will sometimes not dip old pieces in fear the piece will fall apart. So I scrubbed with denatured alcohol and scraped and sanded for days. Then I got brave, bought a gallon of STRYPEEZE paint and varnish (and shellac) r...
I’ve had a couple of questions as to what I use for finish on my pens. So, I thought I’d post a small process flow. I didn’t do the drilling process because the batteries died, so this is the lathe process. I’ve purchased a couple of new lathe pen making tools, and I got a new Lathe chisel for my birthday. So this is the first time on this lathe. And the first time with these tools, but I’ve used the finish before. I got a new Carbide Lathe tool. I saw t...
I was trying to find a good article/link about popping the grain in black walnut but didn’t find one that really explained it for me. There are many articles/links dealing with maple though. As luck would have it, our woodworkers club in association with the local adult education was going to host a few classes on finishing. These classes were mainly dealing with “old school” finishing techniques including French polish. Although not actually going all the way through th...
I finally had a day to work on our stuff. With a little urging from my girlfriend to finish the fumed table sitting in our dining room, I bit the bullet and gave it a good shellacing. This was my first time using shellac. It’s pretty difficult to work with, as it dries fast and leave a build-up. I cut the Zinser Amber in half with denatured alcohol, and grabbed a beer for myself (I thought it only fair), and went to town on it. It gave it a nice, rich look. When that dried, I ...
Warriors of Wood ….i have travailed the road that others could not see,and while on this road i carried pictures inside my head,where none could side-track me from my dreams of wood,just as wood and i have learned to deal with our times of age…. ….still working wood just as the wood works me in style,my character has many times been planed by the hand of wood,till even now there is the gnawing pain that pushes me faster,much to do as still counting the opportunities of project...
A Story of Lakh ….garnetiferous,an expression of mein air,your color plays me….—-by flp ——————————————————————————————————————————————Every picture tells a story…. if I the recipient can...
- My Journey As A Creative Designer - Woodworking and Beyond - 1815 parts
- Extremely Average - 324 parts
- Toy costruction - 130 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1840 entries
- dbhost - 448 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 322 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 265 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 253 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 222 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- bandit571 - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries