one of our fellow jocks asked me to help him thru the process of makeing a shelf similar to one i had posted , i ageed and he called me . well over the phone wasnt going that well so i told him id try to do a blog . this will be the first time so ill give it my best shot ! the one im going to do has the sides flared back to the wall at 30 degrees instead of returned back on a 45. like a mantle top would be if you prefer its the same process just cut 45 s instead of the 30s first ill m...
I’m surprised at how much progress I’ve made since the last blog, especially since this part was pretty hand tool intensive. The following is the process I went through the make the lower shelf. I had a bunch of rough sawn Red Oak that was perfect to use up on the shelf. I’m done making furniture out of Red Oak so I really wanted to burn through it all with this bench build. So I got a nice workout two days ago with the wooden Fore, Scrub, and Stanley #5. I got these boards fl...
Today I tried making pegs for the false shallow holes. I had alot of trouble doing it the way the plan instructed. I would get chip out when carving the facets on the plugs. I’m using Walnut, maybe Ebony wouldn’t do this because it’s more dense. So I setup my disk sander miter to 30 degrees, & sanded my 3/8” stock to a point. Then I cut to the hole depth, & tapped them in with hammer with a dab of glue. Here’s a short video of how I used my disk san...
Book Shelf – Portable Bookshelf – for Tabletop Wood Magazine – May 2003 – for Plans I used a Sliding Dovetail to attach the shelf to the Ends instead of what the plans called for. I found a Bed Headboard on the street on Trash day… was solid wood! That’s what I used. I could have / should have sanded the wood a little more, but I thought it would some character to it the way I did. A little wood burning was done for a Unicorn on each End. ...
My garage is an old barn. It is partitioned into three sections: 1) a 20’x20’ on the bottom right, 2) a 10’x20’ on the bottom left with stairs to 3)my shop on the second floor. So last night I was building some shelving on the bottom right. When I finished aroung 10pm, I took a 45min break to grab a bite. When I returned, I started filling the shelves. In the room on the left I heard a rustling noise. I peeked through the connecting door and discovered… a s...
I have a client that lives close to me, and we have had a lot of fun designing and building things for their home. They sort of “pushed” me into quitting my day job by offering a long term commission to transform their home with functional-art pieces one at a time, according to an overall game plan. They had a general idea of what they wanted, but needed someone to turn the dream into wood. They were willing to adapt their ideas to mine, and vice versa, and I have really appr...
I just completed the cherry display shelves being built for some close friends in Central Oregon. This shelf will be used to display works of art in thier gallery. The display shelf is built from steamed cherry and cherry plywood with pocket screw construction. Dimensions are 18 inches square and 5 feet tall. The finish is 4 coats of hand rubbed tung oil and 2 coats of wax. Ready for finish Hole drilling jig for glass shelf supports Drilling shelf support holes Drill, insty drill ...
I thought I would share the progess of a couple of cherry display shelves being built for some close friends in Central Oregon. This will be used to display works of art in thier gallery. I am using steamed cherry and pocket screw construction. This a follow up from a previous post on using the Kreg Pocket Hole Jig system. I am taking a break from work and the shop spending Mothers Day weekend in Sisters, Oregon. Final sanding and finish await me at home. Cherry top with first coat of tung...
Right Click to DownloadRight Click to Download in HDSubscription Options Without a doubt, this is one of those “procrastination projects”. For years, Nicole has been after me to build her a little shelf near our gaming desk. She has a bunch of little collectibles that she wants to display and there’s simply no storage space in that corner of the room. On a monthly basis, she would remind me of this need and even resorted to threats: “You know, Lowe’s has th...
I saw this FWW Complete Illustrator Guide to Woodworking, and while I found most of the book to be mediocre (although a nice reference book when you’re starting woodworking) I did pick up a couple of cool ideas from it… then again, it might have been from a different book…lol so I finally mounted my (until now just laying there) hand planes in the cabinet. The shelves are shaped to the profile of each handplane for full support, the shelf has a small ‘step’ (1...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 242 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries