28 days ago
by clieb91 |
8 comments »
As most of you know it is usually a good thing to have a happy wife. Well I am just finishing up a few projects that are helping to make my wife a little happier. Some of you know I have a basement workshop, I keep some of my wood though upstairs in the garage (same place my wife parks everyday). Well the wood was getting a bit out of hand.
Note my sheet goods on the far right side.
One of my drying piles.
So a few weeks ago I tackled the sheet goods side. I got rid of a few ...
Read this entry »
581 days ago
by rance |
10 comments »
This was spurred from David's thread in searching for a way to haul plywood in a small truck. I came up with a ‘Bed Sled’ and kept modifying it. I thought rather than taking over his thread, I’d offer it here.
Notice the Grocery Bag corrall up front.
The ‘Z’ system in the center is hinged and can be folded up and laid flat. When set up, it sits on top of and locks in place(with a half lap) over the rear support. The rear support sits on top of and...
Read this entry »
1201 days ago
by Jei'son |
12 comments »
edit – I actually did this before the workbench, but since I’m adding it to this series after the fact, it winds up as #2. I designed this partly to learn more about using SketchUp, and partly because its something I’d like to make to keep organized and clean. After looking at what I usually keep on hand and the sizes of scraps I seem to accumulate, and combining some ideas from a few other mobile racks I’ve seen on LJs, I came up with this.
Its 24” wide, by ...
Read this entry »
