With the workbench complete, it’s time to make some kind of storage system for the hand tools I’ll be using on the bench. I’ve amassed a small collection of older Stanley planes, a couple of LN block planes, a few chisels of different varieties and various other tools that I’d like to have readily accessible from the bench. I’ve chosen to make a stand that will sit next to the bench. The design is still not solidified, but I did start on the section dedicated ...
Sharpening station wet grinder (Thormek, Sheppac, Jet, whatever). #3: Dedicated area for the sharpening station
Dedicated area for the sharpening stationfinally a dedicated area in the shop… Never too late! The more woodworking I do the more I realize that half the work is sharp irons.And I was really tired to have the water grinder, water and sharpening gear all over the place, so even my shop is really small, I decided to dedicate a little area to sharpening.It’s right behind my workbench, so I will need only to turn around to touch up an iron. First step is to cut up some waterp...
Workshop sharpening stationnear at hand This post is from my un-posted folder. In the new workshop I placed the water grinder in a different room than the work bench.So I thought it would be nice with a close at hand sharpening station right next to the bench. So here the new shop setup, all the tool right at hand. Sharpening station with the pond and gear right at hand.In the cabinet I keep all the different stones, jigs, oils and what else is needed for obtaining that sweet edge...
I’m glad that I had a sharpening session directly on my temporary workbench, before I finished (or even started, ahem) my “real” bench. After a while, the water and slurry started to fly, and the amount that sloshed over my simple little sharpening stone base would have given me a fit over my nice workbench surface. Time for a dedicated sharpening station. But with a 6×8 shop, I’m hesitant to “dedicate” space for anything outside of my bench. Fortun...
Over the past year I have been collecting DMT DiaSharp stones one at a time. This is what have: Extra-Extra Coarse (120x)Extra Coarse (220x)Fine (600x)Extra Fine (1200x)Extra-Extra Fine (8000x) Now that I have a full collection I decided to make a sharpening station for them. Up to now they have all been sitting on the bench or where ever else they wouldn’t be in the way. My goal is to have them all inset into a piece of plywood so they will always be together and accessible. ...
Video: https://www.youtube.com/watch?v=W8TZf3psYDM In this video I show you how I built this very simple sharpening station while trying out a few new methods along the way.
- My Journey As A Creative Designer - Woodworking and Beyond - 1766 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Toy costruction - 93 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1791 entries
- dbhost - 430 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 252 entries
- Betsy - 228 entries
- robscastle - 226 entries
- stefang - 221 entries
- Dave Rutan - 219 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 198 entries
- Smitty_Cabinetshop - 194 entries