Woodworking blog entries tagged with 'sharpening station'

  • Advertise with us
View JordsWoodShop's profile

How to Build a Simple Sharpening Station

03-29-2016 08:58 AM by JordsWoodShop | 0 comments »

Video: In this video I show you how I built this very simple sharpening station while trying out a few new methods along the way.

Read this entry »

View builtinbkyn's profile

New Shop in the Raw #9: Hand Tool Storage/Sharpening Station

03-06-2016 10:02 PM by builtinbkyn | 23 comments »

With the workbench complete, it’s time to make some kind of storage system for the hand tools I’ll be using on the bench. I’ve amassed a small collection of older Stanley planes, a couple of LN block planes, a few chisels of different varieties and various other tools that I’d like to have readily accessible from the bench. I’ve chosen to make a stand that will sit next to the bench. The design is still not solidified, but I did start on the section dedicated ...

Read this entry »

View mafe's profile

Sharpening station waterstones #1: Workshop sharpening station - near at hand

12-08-2013 04:16 PM by mafe | 13 comments »

Workshop sharpening stationnear at hand This post is from my un-posted folder. In the new workshop I placed the water grinder in a different room than the work bench.So I thought it would be nice with a close at hand sharpening station right next to the bench. So here the new shop setup, all the tool right at hand. Sharpening station with the pond and gear right at hand.In the cabinet I keep all the different stones, jigs, oils and what else is needed for obtaining that sweet edge...

Read this entry »

View GMatheson's profile

DMT Sharpening Station #1: First Chapter

08-27-2013 07:08 PM by GMatheson | 9 comments »

Over the past year I have been collecting DMT DiaSharp stones one at a time. This is what have: Extra-Extra Coarse (120x)Extra Coarse (220x)Fine (600x)Extra Fine (1200x)Extra-Extra Fine (8000x) Now that I have a full collection I decided to make a sharpening station for them. Up to now they have all been sitting on the bench or where ever else they wouldn’t be in the way. My goal is to have them all inset into a piece of plywood so they will always be together and accessible. ...

Read this entry »

View mafe's profile

Sharpening station wet grinder (Thormek, Sheppac, Jet, whatever). #3: Dedicated area for the sharpening station

09-03-2011 09:26 PM by mafe | 13 comments »

Dedicated area for the sharpening stationfinally a dedicated area in the shop… Never too late! The more woodworking I do the more I realize that half the work is sharp irons.And I was really tired to have the water grinder, water and sharpening gear all over the place, so even my shop is really small, I decided to dedicate a little area to sharpening.It’s right behind my workbench, so I will need only to turn around to touch up an iron. First step is to cut up some waterp...

Read this entry »

View Eric's profile

Getting Creative with Little Space

02-08-2008 12:12 PM by Eric | 9 comments »

I’m glad that I had a sharpening session directly on my temporary workbench, before I finished (or even started, ahem) my “real” bench. After a while, the water and slurry started to fly, and the amount that sloshed over my simple little sharpening stone base would have given me a fit over my nice workbench surface. Time for a dedicated sharpening station. But with a 6×8 shop, I’m hesitant to “dedicate” space for anything outside of my bench. Fortun...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics