By Joshua Farnsworth (Writer at WoodAndShop.com) In the above video I share a tutorial on how to choose and sharpen augers and auger bits. The most important consideration when buying vintage auger bits is the lead screw. If it’s blunt then you won’t have luck in getting your auger bit started into the wood. And that will lead to no hole in your wood! You should purchase a simple auger bit file (like this one that I purchased). This special file has file teeth on the face ...
10 Steps to Getting Started in Traditional Woodworking with Hand Tools #11: |Step 10| Learn how to Finish the Wood
Step 10 is one of my favorite steps, because you get to see the true beauty reveal itself in the wood, and the grain patterns shine forth! I’ll admit it, I’m not one of those woodworkers who love complex finish recipes, but I love making it as simple as possible. In the above video I introduced quite a few of the well-known finishes used by woodworkers (there’s probably a lot more) but I encourage everyone to experiment and find out which finishes they like the best. My favorite, easies...
10 Steps to Getting Started in Traditional Woodworking with Hand Tools #10: |Step 9| Learn how to Fasten, Assemble & Glue-up Woodworking Projects
Every project has different requirements for assembling, gluing, and clamping, but these videos can help with some basic tips. It’s important to have plenty of clamps so you don’t miss clamping a vital area of a project. 9.1 Fastening I used to think that using nails, and other fasteners, wasn’t part of traditional woodworking. But then I took a week-long class at Roy Underhill’s “Woodwright School” and learned that cut nails and other fasteners is actually very traditional. And it’s...
10 Steps to Getting Started in Traditional Woodworking with Hand Tools #9: |Step 8| Joinery: Learn how to Layout & Cut Joints
People called “Joiners” cut joints in wood, in order to get the wood to fit (and stay) together. There are many, many different joints for many different applications. I’ll keep adding joinery videos below (I’m starting with the more basic joints and will move on to more complex joints), so keep checking back. Before watching the videos, checkout this cool woodworking joint chart! (credit: David Royce). 8.1 Learn How to Cut Dovetail Joints Here’s a very detailed 15 step video t...
10 Steps to Getting Started in Traditional Woodworking with Hand Tools #8: |Step 7| Learn how to Layout & Mark the Wood
Before you can accurately cut joints to fit your wood together, you need to learn to accurately measure and layout your work pieces. My below videos will help you understand the different marking, measuring, & layout tools. They’ll also show you how to use them! If you don’t see what you’re looking for, don’t worry…I’m always adding more videos! Understanding Marking, Measuring, & Layout Tools: Precision is a major key to enjoying woodworking with hand tools. But, like all...
10 Steps to Getting Started in Traditional Woodworking with Hand Tools #7: |Step 6| Learn to Prepare Wood: Square, Flat, Straight, & Smooth
In order for wood joints to fit together properly and for edges to glue together tightly your boards need to be perfectly square, straight, and smooth. Although this process isn’t as quick as “milling” boards through power tools, it doesn’t take all that long, and is much more satisfying. Check out the video tutorials below, and choose your favorite! My Favorite Videos about Dimensioning & Squaring Boards with Hand Tools: Here are a few of my favorite videos about squaring and pr...
10 Steps to Getting Started in Traditional Woodworking with Hand Tools #6: |Step 5| Learn How to Design Woodworking Projects
You can definitely find plans for furniture and projects that other woodworkers have built, but I personally love the creative bliss that comes from designing my own projects. I also love looking at furniture in antique stores and on Pinterest to get ideas (See my Pinterest photos). But I always customize for my available space. Use Free Woodworking Design Software Ever since I was a kid I have drawn my “inspired” furniture sketches in a sketch book (or the back of a napkin), but...
10 Steps to Getting Started in Traditional Woodworking with Hand Tools #5: |Step 4| Learn how to Use Woodworking Hand Tools
Step number 4 gets into actually using your new or old traditional woodworking hand tools to create something! But just like a bike a car, or a sword, these tools will work properly and get you where you want to go (e.g. building something beautiful) if you learn how to wield them properly. So check out these videos, and come back for more…I’ll be adding more and more videos over time; beginning with the fundamental tools and moving onto the specialty tools. 4.1 How to Use Hand Planes ...
10 Steps to Getting Started in Traditional Woodworking with Hand Tools #4: |Step 3| Learn how to Refurbish, Tune, & Sharpen Tools
My wife loves to say, “hun, I think you love restoring hand tools almost as much as woodworking!” I think she’s right. There’s something magical about taking an antique (and very well built) woodworking hand tool and bringing it back to working order. Removing the rust, tuning up the parts, and sharpening the blade gives a feeling of satisfaction; especially when seeing the finished result. I get a feeling of a connection with the past, with my ancestors, with a time when things were made ...
I just started to recondition my first hand plane! I am not going to say restore just yet because I am not confident in my restoration process. I basically have just taken it all apart and cleaned it up. It was pretty rough when I picked it up off Ebay. I got it for 6 bucks and about 12 for the shipping. So for about 20 dollars I think I picked up a good deal.So far I sanded it all and polished the screws frog ext. I left the adjusting knob on and polished that the best I could. I didn’...
- My Journey As A Scroll Saw Pattern Designer - 1614 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1639 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 222 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- robscastle - 181 entries